Join our mailing list!



Knowledge Base:  
You are here: Knowledge Base > Information Guides
Activator Definition
Last Updated: 05/04/2014
Activator - A fluid used to cure an adhesive or clean a component prior to the adhesive being applied. Sometimes associated with Cyanoacrylates in brush or spray format. Also used as the second part of a two-part adhesive.







Was this article helpful?

Comments:
 

Related Articles
 > How to attach the adapter assembly hose to the syringe barrel
 > How to connect dispenser to external source using I/O Configuration
 > Watery liquid drips from either TS250, TS255, TS350, TS355 syringe dispensers
 > Thick paste, gels, silicones, sealants, epoxies, etc not flowing or restricted when dispensing
 > Time pressure dispensing tutorial
 > Filling techniques for syringe barrels
 > Advice for dispensing different fluid types
 > Advice for dispensing sealants, grease and solder pastes
 > Smooth flow tapered tips
 > Bench-top fluid dispensing: Easy when you know how
 > Dispensing System: Reducing maintenance requirements in dispensing applications
 > Piston Comparison for 700 Series Dispensing Syringes
 > Rotary Auger Valves � Pros and Cons
 > Dispensing Adhesives Material Can Be Challenging
 > Improving the Grease Dispensing Process
 > Benchtop epoxy dispensing small shot
 > The Negative Effects of Reusing Syringes and Accessories
 > Fluid Viscosity Chart Table
 > Dispense valve material selection guide
 > TS5600 series diaphragm valves specifications
 > TS5420 needle valve specifications
 > TS5520 spray valve specifications
 > TS1212 pinch tube valve specifications
 > TS1201 pinch tube pen valve specifications
 > Fluid dot anatomy volume compared to deposit diameter
 > General advice for handling Cyanoacrylates in bottles
 > Avoid needle tips clogging using Cyanoacrylate adhesives
 > Basic TS250/ TS255 bench dispensers manual applications
 > Reason to use a brush tip with a timed pulse dispenser
 > If you use Cyanoacrylates...
 > Some typical dispensing applications
 > Reducing Hand Fatigue and Variability in Medical Device Assembly Processes
 > General advice for handling Cyanoacrylates adhesives
 > Viscosity of Fluids to Compare With
 > Dispenser spares & accessories
 > Spray Valve Coverage Chart
 > Techcon cartridge gun spares & accessories
 > Techcon spool valve spares & accessories
 > Techcon spray valve spares & accessories
 > Techcon needle valve spares & accessories
 > Fisnar peristaltic pump spares & accessories
 > Dispensing tip gauge size chart
 > Benchtop dispensing robots
 > Dilatent Definition
 > Conformal Coating Product Description - a brief guide
 > Potting Encapsulating Product Description - a brief guide
 > Sealants Product Description - a brief guide
 > Adhesive Technical Information Chart
 > Adhesive Dispensing Valve Selection Guide
 > Chemistry Technical Information
 > Volume, Weight and Length Conversions
 > Temperature Conversions
 > Durometer Conversions
 > Fluid Coverage Information
 > Adhesive Dispensing Luer Lock & Luer Slip Tip Attachment
 > Accelerator Definition
 > Acrylic Definition
 > Alloy Definition
 > Anaerobic Definition
 > Aqueous Definition
 > Balling Definition
 > Braze Paste Definition
 > Caulk Definition
 > Centipoise Definition
 > Conductive Epoxy Definition
 > Cyanoacrylate Definition
 > Epoxy Definition
 > Hot Melt Definition
 > Polyurethane Definition
 > Silicone Definition