Polyurethane - One
or two-part urethane adhesives provide superior bonds with minimal
surface preparation for today's high performance thermo sets and
thermoplastics. They provide excellent flexibility and durability.
Polyurethanes cure via a catalyst, heat or air evaporation. Generally
slower to cure with more challenging handling or curing properties.
Easy to dispense two-part PUs using dual cartridges and mixer nozzles or metering and mixing machine. Single part PUs can be dispensed using a syringe dispenser or pinch tube valve system.
Related Articles |
> How to attach the adapter assembly hose to the syringe barrel
> How to connect dispenser to external source using I/O Configuration
> Watery liquid drips from either TS250, TS255, TS350, TS355 syringe dispensers
> Thick paste, gels, silicones, sealants, epoxies, etc not flowing or restricted when dispensing
> Time pressure dispensing tutorial
> Filling techniques for syringe barrels
> Advice for dispensing different fluid types
> Advice for dispensing sealants, grease and solder pastes
> Smooth flow tapered tips
> Bench-top fluid dispensing: Easy when you know how
> Dispensing System: Reducing maintenance requirements in dispensing applications
> Piston Comparison for 700 Series Dispensing Syringes
> Rotary Auger Valves � Pros and Cons
> Dispensing Adhesives Material Can Be Challenging
> Improving the Grease Dispensing Process
> Benchtop epoxy dispensing small shot
> The Negative Effects of Reusing Syringes and Accessories
> Fluid Viscosity Chart Table
> Dispense valve material selection guide
> TS5600 series diaphragm valves specifications
> TS5420 needle valve specifications
> TS5520 spray valve specifications
> TS1212 pinch tube valve specifications
> TS1201 pinch tube pen valve specifications
> Fluid dot anatomy volume compared to deposit diameter
> General advice for handling Cyanoacrylates in bottles
> Avoid needle tips clogging using Cyanoacrylate adhesives
> Basic TS250/ TS255 bench dispensers manual applications
> Reason to use a brush tip with a timed pulse dispenser
> If you use Cyanoacrylates...
> Some typical dispensing applications
> Reducing Hand Fatigue and Variability in Medical Device Assembly Processes
> General advice for handling Cyanoacrylates adhesives
> Viscosity of Fluids to Compare With
> Dispenser spares & accessories
> Spray Valve Coverage Chart
> Techcon cartridge gun spares & accessories
> Techcon spool valve spares & accessories
> Techcon spray valve spares & accessories
> Techcon needle valve spares & accessories
> Fisnar peristaltic pump spares & accessories
> Dispensing tip gauge size chart
> Benchtop dispensing robots
> Dilatent Definition
> Conformal Coating Product Description - a brief guide
> Potting Encapsulating Product Description - a brief guide
> Sealants Product Description - a brief guide
> Adhesive Technical Information Chart
> Adhesive Dispensing Valve Selection Guide
> Chemistry Technical Information
> Volume, Weight and Length Conversions
> Temperature Conversions
> Durometer Conversions
> Fluid Coverage Information
> Adhesive Dispensing Luer Lock & Luer Slip Tip Attachment
> Accelerator Definition
> Activator Definition
> Acrylic Definition
> Alloy Definition
> Anaerobic Definition
> Aqueous Definition
> Balling Definition
> Braze Paste Definition
> Caulk Definition
> Centipoise Definition
> Conductive Epoxy Definition
> Cyanoacrylate Definition
> Epoxy Definition
> Hot Melt Definition
> Silicone Definition
|
|