Join our mailing list!



Knowledge Base:  
You are here: Knowledge Base > Information Guides
Potting Encapsulating Product Description - a brief guide
Last Updated: 15/12/2012

Potting Encapsulating:

Acrylic - Epoxy potting compounds are availanble in one or two-component formulas. They offer the widest range of handling and cured properties along with a wide range of viscosities. Epoxies provide excellent adhesion to most surfaces plus excellent resistance to most environments and chemicals. Epoxy potting compounds provide very good electrical properties with minimal or no volatiles during curing.

Polyurethane - Polyurethane potting compounds are available in one and two-component formulas. They offer excellent adhesion to most materials along with excellent abrasion resistance. Polyurethanes have good electrical properties along with high impact strength. Excellent low temperature flexibility is provided with an upper service temperature limit of 250 deg/F.

Silicone - Silicone potting compounds are available in 100% solid one and two-component materials with user-friendly mix properties. Silicone potting compounds are high in purity, low in toxicity with outstanding weather resistance. The silicone materials function from -100 deg/F to 600 def/F and provide the best thermal cycle capabilities available.

UV Curable - UV curable potting compounds are available in both one and two-component formulations. These 100% solid materials usually cure within 10-20 seconds when exposed to UV or visible light sources. UV curable potting compounds provide rapid cure cycles, increased throughput and are available in various chemistries.



Was this article helpful?

Comments:
 

Related Articles
 > How to attach the adapter assembly hose to the syringe barrel
 > How to connect dispenser to external source using I/O Configuration
 > Watery liquid drips from either TS250, TS255, TS350, TS355 syringe dispensers
 > Thick paste, gels, silicones, sealants, epoxies, etc not flowing or restricted when dispensing
 > Time pressure dispensing tutorial
 > Filling techniques for syringe barrels
 > Advice for dispensing different fluid types
 > Advice for dispensing sealants, grease and solder pastes
 > Smooth flow tapered tips
 > Bench-top fluid dispensing: Easy when you know how
 > Dispensing System: Reducing maintenance requirements in dispensing applications
 > Piston Comparison for 700 Series Dispensing Syringes
 > Rotary Auger Valves � Pros and Cons
 > Dispensing Adhesives Material Can Be Challenging
 > Improving the Grease Dispensing Process
 > Benchtop epoxy dispensing small shot
 > The Negative Effects of Reusing Syringes and Accessories
 > Fluid Viscosity Chart Table
 > Dispense valve material selection guide
 > TS5600 series diaphragm valves specifications
 > TS5420 needle valve specifications
 > TS5520 spray valve specifications
 > TS1212 pinch tube valve specifications
 > TS1201 pinch tube pen valve specifications
 > Fluid dot anatomy volume compared to deposit diameter
 > General advice for handling Cyanoacrylates in bottles
 > Avoid needle tips clogging using Cyanoacrylate adhesives
 > Basic TS250/ TS255 bench dispensers manual applications
 > Reason to use a brush tip with a timed pulse dispenser
 > If you use Cyanoacrylates...
 > Some typical dispensing applications
 > Reducing Hand Fatigue and Variability in Medical Device Assembly Processes
 > General advice for handling Cyanoacrylates adhesives
 > Viscosity of Fluids to Compare With
 > Dispenser spares & accessories
 > Spray Valve Coverage Chart
 > Techcon cartridge gun spares & accessories
 > Techcon spool valve spares & accessories
 > Techcon spray valve spares & accessories
 > Techcon needle valve spares & accessories
 > Fisnar peristaltic pump spares & accessories
 > Dispensing tip gauge size chart
 > Benchtop dispensing robots
 > Dilatent Definition
 > Conformal Coating Product Description - a brief guide
 > Sealants Product Description - a brief guide
 > Adhesive Technical Information Chart
 > Adhesive Dispensing Valve Selection Guide
 > Chemistry Technical Information
 > Volume, Weight and Length Conversions
 > Temperature Conversions
 > Durometer Conversions
 > Fluid Coverage Information
 > Adhesive Dispensing Luer Lock & Luer Slip Tip Attachment
 > Accelerator Definition
 > Activator Definition
 > Acrylic Definition
 > Alloy Definition
 > Anaerobic Definition
 > Aqueous Definition
 > Balling Definition
 > Braze Paste Definition
 > Caulk Definition
 > Centipoise Definition
 > Conductive Epoxy Definition
 > Cyanoacrylate Definition
 > Epoxy Definition
 > Hot Melt Definition
 > Polyurethane Definition
 > Silicone Definition