Join our mailing list!



Knowledge Base:  
You are here: Knowledge Base > Information Guides
Benchtop epoxy dispensing small shot
Last Updated: 03/01/2012
 Epoxy Dispensing System

Bench top epoxy dispenser applications are still at the forefront of many manufacturing processes, whether filling heavy duty battery terminals for potting, as well polarity identification, or applying surface mount adhesive to PCBA�s so that delicate electronic components can cope with under PCBA heating.


The epoxy dispenser generally connects, via a receiver head, to the material that is supplied in industrial syringes. Ranging in volumes from 3cc to 55cc, there is a syringe barrel capacity that suits any application. Two epoxy dispensers are made available, by Adhesive Dispensing Ltd, TS250 (0-100psi/0-6.9bar) and TS350 (0-100psi/0-6.9bar). Ready to use out of the box, and with their accompanying accessories, the epoxy dispenser can be set-up and ready to use within minutes. Relying on the proven �Time/Pressure� method makes dispensing epoxy hassle-free, whereby an increase or decrease in material output can be easily achieved by an increase or decrease in time, pressure or both.


Air powered pistons apply equal pressure throughout the material allowing for consistent and repeatable deposits. Coloured for ease of identification, red straight walled pistons are recommended for reduced stringing and �bouncing� with high viscous material, blue wiper pistons are recommend for general applications and white wiper pistons are a tighter fit for use with low viscosity materials. Wiper versions ensure no residue is left on the syringe walls when the syringe is depleted. Tip and end caps ensure that contaminants cannot come into contact with the material, when not in use or not connected to the epoxy dispenser.


Dispensing tips, ranging from 14 � 32 gauge, ensure the epoxy dispenser can achieve a wide variety of dot a bead sizes. In combination with time and pressure and the correct dispensing tip, the system can perform a variety of complex dispensing tasks.



Was this article helpful?

Comments:
 

Related Articles
 > How to attach the adapter assembly hose to the syringe barrel
 > How to connect dispenser to external source using I/O Configuration
 > Watery liquid drips from either TS250, TS255, TS350, TS355 syringe dispensers
 > Thick paste, gels, silicones, sealants, epoxies, etc not flowing or restricted when dispensing
 > Time pressure dispensing tutorial
 > Filling techniques for syringe barrels
 > Advice for dispensing different fluid types
 > Advice for dispensing sealants, grease and solder pastes
 > Smooth flow tapered tips
 > Bench-top fluid dispensing: Easy when you know how
 > Dispensing System: Reducing maintenance requirements in dispensing applications
 > Piston Comparison for 700 Series Dispensing Syringes
 > Rotary Auger Valves � Pros and Cons
 > Dispensing Adhesives Material Can Be Challenging
 > Improving the Grease Dispensing Process
 > The Negative Effects of Reusing Syringes and Accessories
 > Fluid Viscosity Chart Table
 > Dispense valve material selection guide
 > TS5600 series diaphragm valves specifications
 > TS5420 needle valve specifications
 > TS5520 spray valve specifications
 > TS1212 pinch tube valve specifications
 > TS1201 pinch tube pen valve specifications
 > Fluid dot anatomy volume compared to deposit diameter
 > General advice for handling Cyanoacrylates in bottles
 > Avoid needle tips clogging using Cyanoacrylate adhesives
 > Basic TS250/ TS255 bench dispensers manual applications
 > Reason to use a brush tip with a timed pulse dispenser
 > If you use Cyanoacrylates...
 > Some typical dispensing applications
 > Reducing Hand Fatigue and Variability in Medical Device Assembly Processes
 > General advice for handling Cyanoacrylates adhesives
 > Viscosity of Fluids to Compare With
 > Dispenser spares & accessories
 > Spray Valve Coverage Chart
 > Techcon cartridge gun spares & accessories
 > Techcon spool valve spares & accessories
 > Techcon spray valve spares & accessories
 > Techcon needle valve spares & accessories
 > Fisnar peristaltic pump spares & accessories
 > Dispensing tip gauge size chart
 > Benchtop dispensing robots
 > Dilatent Definition
 > Conformal Coating Product Description - a brief guide
 > Potting Encapsulating Product Description - a brief guide
 > Sealants Product Description - a brief guide
 > Adhesive Technical Information Chart
 > Adhesive Dispensing Valve Selection Guide
 > Chemistry Technical Information
 > Volume, Weight and Length Conversions
 > Temperature Conversions
 > Durometer Conversions
 > Fluid Coverage Information
 > Adhesive Dispensing Luer Lock & Luer Slip Tip Attachment
 > Accelerator Definition
 > Activator Definition
 > Acrylic Definition
 > Alloy Definition
 > Anaerobic Definition
 > Aqueous Definition
 > Balling Definition
 > Braze Paste Definition
 > Caulk Definition
 > Centipoise Definition
 > Conductive Epoxy Definition
 > Cyanoacrylate Definition
 > Epoxy Definition
 > Hot Melt Definition
 > Polyurethane Definition
 > Silicone Definition