7015LLPK Orange Colour Tip Cap Seal Luer Lock
7015LLPK Orange Colour Tip Cap Seal Luer Lock
Product Description
Part
7015LLPK is a tip cap seal made from polypropylene that will seal the end of
a syringe b |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
Chemistry Technical Information
Chemistry Technical Information |
2 station dispense system using TS1201 pens fed from 500gram pressure pot
2 station dispense system using TS1201 pens fed from 500 gram pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This
setup allows fluid to be dispen |
Thick paste, gels, silicones, sealants, epoxies, etc not flowing or restricted when dispensing
TS250, TS350, TS924, TS924V Syringe Dispensers
Thick paste, gels, silicones, sealants, epoxies, etc not flowing or restricted when dispensing.
- Air pres |
Medical device industry applications
MEDICAL DEVICE PRODUCTS INDUSTRY APPLICATIONS Apply UV-cure adhesives to needle assemblies Fill electrodes with chlorodised gel Dispense |
Advice for dispensing different fluid types
Dispensing difficult-to-dispense fluids Most assembly fluids are easy to set up and dispense, and when you use our unique 700 series com |
Smooth flow tapered tips
Tapered tips explained Moulded polyethylene tapered tips provide a smooth flow for most assembly fluids. They are built to block UV ligh |
Bench-top fluid dispensing: Easy when you know how
Bench-top fluid dispensing: Easy when you know how
Manual
handheld, semi-automatic and automatic represent the three dispensing |
Dispensing Adhesives Material Can Be Challenging
Dispensing Adhesives Material Can Be Challenging
Dispensing
adhesives can be a challenging application. Choosing the right type |
The Negative Effects of Reusing Syringes and Accessories
The Negative Effects of Reusing Syringes and Accessories
Every component in the Timed and
Pressure dispensing system plays an important role in controlling the
accuracy and repeatability |
2 station dispense system on stand using TS1201 pens with manifold fed from 5 litre pressure pot
2 station dispense system using TS1201 pens fed from 5 litre pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This setup allows fluid to be dispensed |
General advice for handling Cyanoacrylates in bottles
Cyanoacrylate adhesive, more popularly known as super glue, or �CA� glue,
is the most often used adhesive in a assembly processes. It helps to
have super glue as an adhesive among other glues for |
Reason to use a brush tip with a timed pulse dispenser
Some applications require a different deposit other than a dot or a bead. More like a smear. By combining our brush tip with one of our air-powered dispensers, many new applications have become possi |
General advice for handling Cyanoacrylates adhesives
Cyanoacrylates are used in ... Ammunitions Appliances Automotive Components Batteries Consumer Products Cosmetic Containers Electronics Loudspeakers Medical Devices Writing Instruments Thousands of t |
Instructions 50ml dual side by side epoxy type cartridges
Using epoxy type dual cartridges 1:1, 2:1, 4:1 and 10:1 ratio's. Always read and follow the health & safety instructions on the adhesive packaging
and material safety data sheet. Use the approp |
Conformal Coating Product Description - a brief guide
Conformal Coatings: Acrylic - Acrylic Conformal Coatings are easy to apply. They dry to the touch at room temperature in minutes, have g |
Potting Encapsulating Product Description - a brief guide
Potting Encapsulating: Acrylic - Epoxy potting compounds are availanble in one or two-component formulas. They offer the widest range of |
Sealants Product Description - a brief guide
Potting Encapsulating: Acrylic - Acrylic Sealants exhibit good adhesion to most surfaces and remains ductile in the presence of ultravio |
Adhesive Dispensing Valve Selection Guide
Adhesive Dispensing Valve Selection Guide
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
|
