TS934A or TS941A Spool Valve controlled by TS350 dispenser
TS934A or TS941A Spool Valve controlled by TS350 dispenser |
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser For dual component epoxy type cartridges using static mixer nozzles |
4 unit dispense station using TS941 Spool Valves supplied by 12oz cartridges controlled by 2 TS350 dispensers
4 unit dispense station using TS941 Spool Valves supplied by 12oz cartridges controlled by 2 TS350 dispensers For silicones, sealants, grease, pastes, gels, etc |
TS1212 QUAD System controlled by (2) TS350 dispensers. Fed by a modified TS1258.
TS1212 QUAD System controlled by (2) TS350 varimeters. Fed by a modified TS1258. For micro shots or beads of most low to medium viscosity liquids |
Anaerobic Dots using TS350 Dispenser (Test)
|
Primer Dots using TS350 Dispenser (Test)
|
Adhesive Dots using TS350 Dispenser (Test)
|
TS941 Spool Valve fed from a pressure pot run from TS350 dispenser
TS941 Spool Valve fed from a pressure pot run from TS350 dispenser System for making deposits of liquids from nozzles or smaller dispense tips |
6 TS1212 valve system controlled by a TS350 dispenser fed by a TS1255 pressure pot
6 TS1212 valve system controlled by a TS350 dispenser fed by a TS1255 pressure pot Dispense system for low to medium viscosity fluids to a 6 head valve making simultaneous deposits |
Ram Elevator System feeding a TS941A Spool Valve controlled by a TS350 dispenser
Ram Elevator System feeding a TS941A Spool Valve controlled by a TS350 dispenser High pressure dispense system from customers own large pail pump feed |
Watery liquid drips from either TS250, TS255, TS350, TS355 syringe dispensers
TS250, TS255, TS350, TS355 Digital Timed Syringe Dispensers
Liquid is dripping after each deposit made .
- Adjust vacuum on dispenser gently to stop the d |
TS250 and TS350 dispenser I/O Configuration and End of Cycle Switch
TS250, TS255, TS350, TS355 I/O Configuration and End of Cycle Switch Upon completion of a dispense cycle, an open collector circuit closes and remains closed until the next dispense cycle. This circu |
I/O Configuration for TS250/TS255/TS350/TS355 Dispensers
|
Syringe dispensing system using a 55cc syringe controlled by a TS350
Syringe dispensing system using a 55cc syringe controlled by a TS350 Standard syringe dispenser from 55cc syringe barrels |
Application guide - solder paste dots to PCBs using digital timed syringe dispenser
Application guide - solder paste dots to PCBs using digital timed syringe dispenser
Customers applying solder paste to small PCBs by hand. Making small repeat de |
Dual TS5420 needle valves supplied by a 5 gal pail pump controlled by a TS350
Dual TS5420 needle valves supplied by a 5 gal pail pump controlled by a TS350 Precision dispense system fed from customers own bulk supply |
TS5420 needle valve fed from TS1258 pressure pot controlled by TS350
TS5420 needle valve fed from TS1258 pressure pot controlled by TS350 Needle valve handles most low to medium viscosity liquids for micro dots to controlled beads |
Dispenser spares & accessories
Where do I find spares for my pneumatic fluid dispenser? Parts are available here . These include some parts that can become accidentally damaged over time such as replacement foot pedals, power supp |
How to connect dispenser to external source using I/O Configuration
I/O connection guide for TS250, TS255, TS350 and TS355 dispensers/ controllers. I/O Configuration and End of Cycle Switch Upon completion of a dispense cycle, an open collector circuit closes and rem |
Vertical setup using dual cartridges a TS1212 valve and controlled by a TS350
Vertical setup using dual cartridges a TS1212 valve and controlled by a TS350 Bench mounted timed dispense system for epoxy type two component cartridges |
