Join our mailing list!



You are here: Home > Equipment > Hot Melt Systems > Heated Hoses, Manual Guns and Vertical Electric Applicator (VEA) > ThermadoseŽ Heated Hoses 115 & 220V
We found 0 results matching your criteria.
Heated hoses

High performance hot melt glue dispensing systems for manual hand controlled or fully automated use. Heated hoses for use with all Thermadose hot melt controller units. Hoses are available in a wide range of lengths and diameters.


Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

 

Hot melt heated hoses


Hoses include a PTFE core, a reinforced stainless steel braid and high temperature insulation with a durable polyester braid cover for abrasion resistance.

WARNING: Always allow extra length for corners, a minimum of 16" (406mm) dia. per bend.


Hoses are designed for either extrusion (beads) (E) or swirl/spray (S) and designated with an "E" or an "S" when ordering.
The standard recommended hose size is 3/8 (9.52mm). Other sizes are available with special fittings. Hoses are described by a diameter code, length and voltage. Hose Lengths are from 4ft (121.92cm) to 24ft (731.52cm)
Diameter Code:
  • Code 4 = 1/4 6.35mm
  • Code 6 = 3/8 9.52mm (standard recommended hose)
  • Code 8 = 1/2 12.70mm
  • Code 12 = 3/4 19.05mm
  • Code 16 = 1.0 25.45mm
Order Information
Order by prefix H then E or S & Dia. Code, Length and Voltage (either 115V or 220V.)
Example
Order code HE-6-8-115 = a hose to dispense an extruded bead (E). Hose # 6 which is a 3/8 (9.52mm) diameter. Hose Length 8ft (243.84cm) and voltage 115V.

Orders are encrypted on a secure server for full security. All personal information and payment details is encrypted on SSL secure website pages. Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warranties expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.