Techkit Cartridges

Our precision components provide safe and leak free fluid dispensing from cartridges. Industrial grade safe products for use with most adhesives, pastes and assembly fluids. Use with air-powered dispensers, cartridge guns or retainers. Cartridges will handle watery liquids to thick pastes at air pressures safely up to 100 psi. Supplied in sealed packs with batch codes. This range of products is designed for filling, mixing and dispensing two-part and three-part materials such as epoxies, polyurethanes, silicones, potting compounds and sealants.

The Techkit is a compact and simple method of packaging two or three component resin systems into a 2.5oz (74ml), 6oz (177ml), 8oz (237ml), 20oz (591ml) or 1/10 gallon (325ml) cartridge. The kit mechanically separates the base and hardener until they are ready to be used. An internal mixing head provides a thorough blend for all types of compounds. Use with cartridge dispensing guns. When the job has been completed, the entire package is disposed of: no clean up or physical contact with the resin.

Cost savings are achieved by reducing labor and material waste. Reliability is increased with accurate compound ratios, complete mixing and proper application techniques. Three types of kits are available: Barrier, Injection and Barrier/Injection types.

Barrier Type
For compounds with a volumetric ratio greater than 10 parts per 100. The catalyst and base are separated by an aluminum barrier formed over the mixing head.
Injection Type
For compounds with a volumetric ratio of 10 parts or less per 100. The catalyst is contained inside the valved mixing rod while the base is in the cartridge.
Barrier/Injection Type
For three component compounds, components of both Injection and Barrier are combined..

Available as kits or separate parts. Also available pre-filled with your specified adhesive or material. Variety of kit size options. We also supply options for mixing the Techkits manually or full automatic.