 |
 |
 |
|
The VD510 Series dispense valves accurately control the application of most low to medium viscosity fluids without drips. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to 0.025") allows for a very fast response with positive shutoff.
Wetted components are made of inert plastics. Takes a direct feed from any pressure pot, cartridge or syringe and includes a selection of flexible fluid line tubing and connectors.
Valve open time can be as short as 15 milliseconds.
Model VD520-PT with PTFE wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. Simple to use with TS550R, TS250, TS350 digital timed controllers.
Part ID: VD520-PT
Wetted Materials: PTFE, NBR
Size: 76mm L x 27mm Dia.
Weight: 75g
Viscosity Range: 1 - 50,000 CPS
Repeatability: +/-0.30%
Cycle Rate: Up to 500 cycles/ minute
Flow Rate (water): 3000ml/minute @ 100 psi
Min Shot Size: 0.01 cc/ ml
Max Fluid Pressure: 100 psi ( 5 Bar)
Activation Pressure: 70 psi (4.8 bar) minimum
Material Inlet: 1/8" NPT
Material Outlet: 1/4-28 UNF
Mounting: 10-32 UNF
Warranty: 1 Year
Commodity Code: 84248940
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: VD510
- Wetted Materials: PTFE, NBR�
- Size: 76mm L x 27mm Dia..
- Weight: 75g
- Viscosity Range: 1 - 50,000 CPS
- Repeatability: �0.30%
- Cycle Rate: Up to 500 cycles/ minute
- Flow Rate (water): 3000ml/minute @ 100 psi
- Min Shot Size: 0.01 cc/ ml
- Max Fluid Pressure: 100 psi ( 5 Bar)
- Activation Pressure: 70 psi (4.8 bar) minimum
- Material Inlet: 1/8" NPT
- Material Outlet: 1/4-28 UNF
- Mounting: 10-32 UNF
- Warranty: 1 Year
Diaphragm valves are used for many varied assembly and production processes where controlled deposits of low to medium viscosity liquids need to be applied. Common applications include:-
Dots and beads of Cyanoacrylates
Dots and beads of solvents
Dots and beads of UV cure
Dots and beads of PVA glues
Deposits of liquid fluxes
Dots and beads of threadlockers
General adhesive application
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Ideal for cyanoacrylates
- High precision solution supplied complete
- Repeat dots, lines or potting of most liquids
- Adjustable stroke control for fine tuning of flow
- Syringe feed, cartridge feed or pressure pot
- Supplied with fluid lines and tip kit
- Easy bench mount, machine mount or robot mount
- Simple to control using TS500R, TS250 or TS350
- 1 Year Warranty
|
|
|
|
|
|
|
|
|
