Join our mailing list!



You are here: Home > Dispensing Equipment > Dispense Valves
We found 0 results matching your criteria.
Dispense Valves

Our precision dispensing valve systems handle most adhesives, liquids, gels and pastes without mess, waste, error or hand fatigue. Dispense valves ensure precise deposits of assembly fluids with options to apply by hand or as part of an automated assembly.


Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Dispensing components


Precision valves dispense accurate deposits of adhesives, solvents, glues, silicones, sealants, pastes, gels, inks, paints, UV cure, lubricants and grease. Direct from syringes, cartridges or pressure pots. Valves will cycle from 500 to 600 times per minute for repeatable and fast bonding, sealing, coating and potting applications. Valves operate with minimal maintenance, ensuring clean and accurate dispensing whether used by hand, fixed on a production line or mounted to an XYZ robot. A typical system includes a dispensing valve, a pressure pot or cartridge feed using a TS250, TS350 or TS500R digital valve controller.

Precision valves will dispense accurate deposits with liquid fed under pressure from syringe barrels, cartridges or tanks. Valves operate with minimal maintenance, ensuring clean and accurate dispensing whether used by hand, fixed on a production line or mounted onto an XYZ robot. Confirm which valve suits a specific adhesive, fluid by type, by fluid viscosity or by application with our valve selection guide here.

Product Pages Category

Product Description


Pinch Tube Valves

Precision pinch valves for use with cyanoacrylates, primers, activators, inks, epoxies, UV cure and solvents. Low cost pinch tubes for zero maintenance and clean-up. Hand held version for controlled beads or pneumatic timed version for repeat deposits. Simple devices for applications requiring accurate dosing of low to medium viscosity fluids.

Diaphragm Valves
Diaphragm Valves

Compact diaphragm valves for fast deposits of cyanoacrylates, UV cure, primers, inks and anaerobics. Low maintenance design featuring a long life diaphragm and stroke adjustment for flow control. Very useful valve for use on XYZ robots or production line manufacturing applications.


Needle valves
Micro dot control using a precision needle valve with low shut off point elimination dead space. Allows for small dots without drips. Adjustable stroke for flow control. Suitable for use with most low to medium viscosity liquids such as UV cure, inks, paints, oils, greases and solvents.
Spool valves
Spool Valves

High pressure spool valves for applying viscous materials including sealants, silicones, RTVs, greases, pastes and gels. Stainless steel versions for fluid pressures up to 2,500 psi and viscosities to 3 million CPS. Suck back action will prevent liquid ooze and drips. Either spring close or air close. Low maintenance design.

Spray valves
Spray Valves

Precision spray valves for coating, lubricating and marking of inks, primers, activators, lubricants and oils. No overspray and fine control down to micro deposits. Stroke adjustment for flow control. Round pattern or fan wide spray nozzles. High speed repeat deposits if required. Aluminium or stainless steel versions.

Auger dispense valves
Auger Valves

Motor driven positive displacement auger valves. For very high accuracy deposits of solder pastes, fluxes, epoxies and fluxes. Disposable feed path assembly eliminates the need for clean-up. Variable speed and auger size allow for micro dots or precise lines of material. Reverse action prevents oozing or drips.

Pressure Pots
Pressure Pots
A range of pressure pots reservoirs and tanks in sizes from 500ml to 19 litre. Tanks for use with watery fluids and medium viscosity liquids. For use with our range of dispense valves and fittings to provide a full feed system. CE certified and industrial grade safe products.
Cartridge retainers
Cartridge Retainers
For use with Techcon and Semco cartridges as well as pre-filled silicone and sealant tubes. Retainers range is size from 2.5 oz (60ml) to 32 oz (960ml). High pressure systems up to 100 psi and industrial grade safe. With a range of accessories. Retainers for 310ml silicone RTV cartridge tubes.
Complete dispensing systemsSystems by Fluid Type
Select from a range of pre-configured systems suitable as proven for use by adhesive or fluid types. Systems include pressure pot, controllers, valves and bench stands. Supplied complete with full accessories including fluid lines, fittings, connectors and recommended tips..
XYZ Robots Benchtop XYZ dispensing robots from 200mm to 600mm size. For accurate and fast deposits of pastes, gels, solvents and epoxies. 2, 3 and 4 axis versions. Including teach pendant, digital dispense system and accessories. New Smart versions for PC programming, vision system and tip alignment.

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warranties expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.