The SVC100 is a programmable spray valve controller designed to control spray valves. The SVC100 programming provides the clean spray adjustment necessary for spraying paint, flux, urethane, lubricants, and for coating and conformal coating operations.

This system uses a highly responsive air pressure management system, coupled with a digital timing circuit and display, to provide consistent, repeatable control over all types of valves.

---

External dimensions: 9.05 x 7.32 x 3.54 (230 x 186 x 90mm)
Weight: 6lbs (2.73kg)
Power input Model SVC100-220: AC 220V 50-60Hz
Power input Model SVC100-110: AC 110V 50/60Hz
Dispensing pressure: 0-6kg/cm2
Dispensing time: 0.001 sec - 99.99 second adjustable
Dispensing selection: LCD digital display
Input/output signal: Open connector, 24VDC (selector by change)
Commodity Code: 90289090
Warranty: 1 Year

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• External dimensions: 9.05 x 7.32 x 3.54 (230 x 186 x 90mm)
• Weight: 6lbs (2.73kg)
• Power input SVC100-110: AC 110V 50/60Hz
• Power input SVC100-220: AC 220V 50-60Hz
• Dispensing pressure: 0-6kg/cm2
• Dispensing time: 0.001 sec - 99.99 sec.
• Dispensing selection: LCD digital display
• Input/output signal: Open connector, 24VDC (selector by change)

Dispensers and controllers require clean and dry compressed air from most small compressors, a mains factory air supply or nitrogen. We recommend the use of a 5 micron air filter on the supply air into the dispenser. This will reduce oil, moisture and particles from the air.

Dispensers and controllers will operate all valves using a simple interface. This system comes with foot switch but also features an I/O connector to accept an external signal to run when linked to a parent machine.