Bench mounted syringe dispense system controlled by a TS250 Bench mounted syringe dispense system controlled by a TS250 Bench mounted timed dispense system for any size syringe barrels making dots or beads |
Typical bench mounted dual cartridge dispense system controlled by a TS924 foot valve Typical bench mounted dual cartridge dispense system controlled by a TS924 foot valve Controlled applicator for epoxies in cartridges 1:1, 2:1, 4:1 and 10:1. |
Cartridge to dual syringe filling station from TS924 footvalve dispenser Cartridge to dual syringe filling station from TS924 footvalve dispenser Bench mounted system for pastes, gels, silicones, sealants, grease, etc. |
Vertical setup using dual cartridges a TS1212 valve and controlled by a TS350 Vertical setup using dual cartridges a TS1212 valve and controlled by a TS350 Bench mounted timed dispense system for epoxy type two component cartridges |
TS5322 mini spool valve fed by a TS918-110 production master system controlled by a TS250 TS5322 mini spool valve fed by a TS918-110 production master system controlled by a TS250 Bench mounted timed dispense system for silicone and sealant type 310ml size cartridges |
TS918-110 production master system controlled by a TS924 Foot Valve TS918-110 production master system controlled by a TS924 Foot Valve Bench mounted non-timed dispense system for silicone and sealant type 310ml size cartridges |
TS918-60 production master system controlled by a TS924 Foot Valve TS918-60 production master system controlled by a TS924 Foot Valve Bench mounted non-timed dispense system for 6oz size cartridges |
Spray Valve set-up using 6 TS5520 controlled by 6 TS500R fed from a TS1258 pressure pot Spray Valve set-up using 6 TS5520 controlled by 6 TS500R fed from a TS1258 pressure pot Bench mounted timed dispense system for any size syringe barrels making dots or beads |
Spray Valve set-up using 2 TS5520 controlled by 2 TS500R fed from a TS1258 pressure pot Spray Valve set-up using 2 TS5520 controlled by 2 TS500R fed from a TS1258 pressure pot Bench mounted timed dispense system for any size syringe barrels making dots or beads |
TS918 production master system with syringe bracket controlled by a TS924 dispenser TS918 production master system with syringe bracket controlled by a TS924 dispenser Simple non-timed dispenser with syringe mounted on bench stand |
TS918-6 production master system using a TS5322 spool valve controlled by a TS250 TS918-6 production master system using a TS5322 spool valve controlled by a TS250 Ideal bench mounted system for making repeat deposits of pastes, gels, silicones and sealants |
Timed deposits of a 2-part epoxy direct from the dual cartridge using an ADL810 dispenser, TS1212 valve and pneumatic gun Timed shots from a 2-part epoxy type side by side cartridge Bench mounted system for dispensing dual epoxies in 50ml, 200ml or 400ml (1:1, 2:1, 4:1 or 10:1 ratio). The ADL810 dispenser contols the TS |
Timed deposits of a 2-part epoxy direct from 1 400ml dual cartridge using a 1000T digital dispenser and modified pneumatic applicator Timed shots from a 400ml 2-part epoxy type side by side cartridge Bench mounted system for dispensing dual epoxies in 400ml (1:1, 2:1, 4:1 or 10:1 ratio). The 1000T dispenser contols the cartridge. M |
Model 195 Semco Shot Meter System
Product Description
The 195
shot-meter is a positive displacement system for precise dispensing of 0.1 to
20cc of material. Ideally suited to syringe filling, this system uses the
2 |