Join our mailing list!



Knowledge Base:  

You are here: Knowledge Base : TS1201 valve
Page of 2
TS1201 Pinch Valve Pen application with material supplied from TS1215 pressure pot
TS1201 Pinch Valve Pen application with material supplied from TS1215 pressure pot Can also be any pressure pot if required
Two part adhesive dispensing system with TS1212 valve or TS1201 pen controlled by TS250 dispenser
Two part adhesive dispensing system with TS1212 valve or TS1201 pen controlled by TS250 dispenser Can be other sized cartridge system if required
TS1201 (2) pen valves supplied from pressure pot divided by liquid manifold
TS1201 (2) pen valves supplied from pressure pot divided by liquid manifold For beads of most low to medium viscosity liquids
Gravity fed CA adhesive dispense system using TS1201 pen valve
Gravity fed CA adhesive dispense system using TS1201 pen valve For dispensing Cyanoacrylate adhesives direct from a 500gram bottle
20oz cartridge reservoir system on bench stand supplying TS1201 handheld pen valve
20oz cartridge reservoir system on bench stand supplying TS1201 handheld pen valve For low to medium viscosity liquids making non-timed deposits
TS1201 Pinch Tube Valve Spares List & Diagram
Replacement parts and spares for Techcon TS1201 Pinch Tube Valve Pen
TS1201 pinch tube pen valve specifications
Specifications, flow rates for TS1201 series pinch tube valves
TS1201 pinch tube pen valve troubleshooting
TS1201 pinch tube valve troubleshooting
Dual pneumatic cartridge gun feeding a TS1201 Pinch Tube Pen Valve
Dual pneumatic cartridge gun feeding a TS1201 Pinch Tube Pen Valve 2 part material dispenser feeding a hand lever valve with disposable wetted tubes and parts
TS1215 tank using a TS1201 valve to dispense from a BT16 brush tip
TS1215 tank using a TS1201 valve to dispense from a BT16 brush tip Simple hand held pen valve dispensing watery liquids through a brush tip nozzle
How to replace a pinch tube on the TS1201 series valve
Pinch tube replacement for TS1201 hand lever valve
TS1201 dispense pen application fed from a 2 gal pressure Pot.
TS1201 dispense pen application fed from a 2 gal pressure Pot. Non-timed hand lever valve fed by large pressure pot with adjustable regulator and gauge
4 station dispense system using TS1201 pens fed from 1 gallon pressure pot
4 station dispense system using TS1201 pens fed from 1 gallon pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot
2 station dispense system using TS1201 pens fed from 500gram pressure pot
2 station dispense system using TS1201 pens fed from 500 gram pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This setup allows fluid to be dispen
Dual TS1201 disposable material path pen application supplied from TS1251 pressure pot
Dual TS1201 disposable material path pen application supplied from TS1251 pressure pot Manual operated pinch tube pen valves run from a liquid manifold with adhesive in a tank with regulator.
2 station dispense system on stand using TS1201 pens with manifold fed from 5 litre pressure pot
2 station dispense system using TS1201 pens fed from 5 litre pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This setup allows fluid to be dispensed
4 station manual dispense system using TS1201 pens with manifold fed from PP300-A 500 gram clear body pressure pot
4 station dispense system using TS1201 pens fed from 500 gram pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This setup allows fluid to be dispense
TS1201 operating instructions for use with a pressure pot
OPERATING INSTRUCTIONS WITH PRESSURE RESERVOIR 1. Connect the fluid tubing from the material reservoir to the female fitting on the pen. 2. Hold the Pen in your hand as if you were writing. Depress t
TS1201 operating instructions for use with a gravity feed reservoir
OPERATING INSTRUCTIONS WITH GRAVITY FEED RESERVOIR The viscosity of the fluid to be dispensed by gravity, or a combination of gravity/siphon, must be low enough (1 to 800 cps). A liquid tight seal mu
TS1201 Pinch pen fed from a TS918 retainer/cap assembly with nozzle
TS1201 Pinch pen fed from a TS918 retainer/cap assembly with nozzle Non timed pen valve fed from large cartridge system