Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
70303RHB Adapter Assembly 3cc Size 3ft Long
USE THIS ADAPTER ASSEMBLY AS THE AIR LINK BETWEEN THE PNEUMATIC DISPENSER AND 3CC SIZE BARRELS
Product Description
70303RHB
is an air adapter assembly for 3cc/ml siz |
Dilatent Definition
Dilatent - A liquid where viscosity (thickness) increases with shearing rate (when you stir it). Dilatent is the opposite of Thixatropic.
|
Accelerator Definition
Accelerator - A fluid used to speed up material curing Usually a low viscosity single part liquid. Sometimes supplied as an aerosol, in a can or in a bottle with a brush.
|
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Anaerobic Definition
Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied |
Braze Paste Definition
Braze Paste - A paste or flux material. For alloys that melt above 425 deg c. Easily applied using air-powered syringe dispenser.
|
Caulk Definition
Caulk - Uusally a sealant or silicone used to fill gaps as well as describing the process of gap filling.
|
Conductive Epoxy Definition
Conductive Epoxy - A
term used with fluids that will conduct electricity. These materials
often come pre-packed in dispensing barrels or cartridges.
|
Cyanoacrylate Definition
Cyanoacrylate - A
one-part adhesive that cures instantly on contact with mated surfaces.
High strength, excellent adhesion to a wide variety of substrates.
Cyanoacrylates are available in a var |
Hot Melt Definition
Hot Melt - A
thermoplastic material that is melted in dispensing equipment and is
applied in a molten state. It then wets the substrate surface and as it
cools, it solidifies forming a bond. Ve |
Polyurethane Definition
Polyurethane - One
or two-part urethane adhesives provide superior bonds with minimal
surface preparation for today's high performance thermo sets and
thermoplastics. They provide excellent fle |
Silicone Definition
Silicone - One-component
adhesive/sealant that cures to a tough rubbery solid upon exposure to
moisture in the air. Silicone has good resistance to weathering,
vibration, moisture and chemicals |
70306RHB Adapter Assembly 3cc
Product Description
70306RHB
is an air adapter assembly for 3cc/ml size industrial air syringe barrels. It
allows an air connection between a pneumatic bench dispenser to a 3cc
syri |
70303RHB Adapter Assembly 3cc
Product Description
70303RHB
is an air adapter assembly for 3cc/ml size industrial air syringe barrels. It
allows an air connection between a pneumatic bench dispenser to a 3cc
syri |
231218 20oz Aerospace Sealant Cartridge Dispenser Gun TDS
Data Sheet for model 231218 - 20 Ounce Cartridge Dispenser Data Sheet Details here |
310ml Euro Cartridge Accessories
310ml Euro Cartridge Accessories Details here |
MAQ 05-16L Static Mixer Nozzle Data Sheet
Static mixer nozzle MAQ 05-16L - 300028 For Data Sheet please click here |
MAH 06-21T Static Mixer Nozzle Data Sheet
Static mixer nozzle MAH 06-21T - 102380 For Data Sheet please click here |
MCH 13-24T Static Mixer Nozzle Data Sheet
Static mixer nozzle MCH 13-24T - 102437 For Data Sheet please click here |
