 |
 |
 |
|
The TS5624 Disposable Diaphragm Valve features a first to market Disposable Material Path. Difficult fluids such as Cyanoacrylates and pre-mixed 2-part epoxies, can now be dispensed without the need of frequent cleaning, by simply replacing the entire wetted area in a matter of seconds, while the valve stays on the production line.
The wetted parts are manufactured from black polyethylene to prevent moisture and UV light come into contact with the dispense fluids. As a result, moisture sensitive fluids such as Cyanoacrylate and UV Cured Adhesives can be dispensed reliably and accurately.
The TS5624 dispenses low to medium viscosity fluids over a wide range of shot and bead sizes, down to a fraction of a micro liter. An internal spring return makes the valves fully adaptable for use with dispenser/ controllers. A short opening stroke provides an extremely fast and positive shut-off. The seal-less valve design offers an excellent moisture sensitive resistance and the incorporated diaphragm creates a barrier between the wetted parts and the air cylinder.
The valve comes with the following items:
Mounting bracket kit
Valve air hose
Luer lock fluid line
Sample packet of DMP inserts
Dispensing tip selection pack
Accessories:
Replacement DMP Insert: DMP-5624
Syringe Bracket: 7509-9100 fits all syringe sizes.
Fitting kit: VFKIT - for 1/4" OD tubing connection
Fluid Reservoirs: TS2220 or TS1258 pressure tank
Note: The TS2220 and TS1258 come with standard 1/4 Inch OD tubing so the VFKIT will be required to make the connection.
Dispensing Tips: Precision dispensing tips ship direct from stock
Features
Disposable material path - no cleaning
Compact size and weight
Excellent moisture sensitive resistance
No special tools required
Low cost of ownership
Accurate and repeatable dispensing
Technical Specifications
Part Number: TS5624DMP
Size (Imperial): See drawing
Size (Metric): See drawing
Weight: 0.25 lb (113g)
Fluid Inlet Port: Luer lock female
Fluid Outlet Port: Luer lock male
Aux Air Inlet Port: 10-32 UNF female
Activation Pressure Range: 70 psi - 90 psi (4.8bar - 6.2bar)
Max Fluid Pressure: 60 psi (4.1bar)
Operating Frequency: 400+ cycles/min.
Mounting Port: 10-32 UNF female
Viscosity Range: 1 - 50 000cps
Wetted Parts: Black Polyethylene Compound
Commodity Code: 90289090
Typical Applications:
Dispensing pre-mixed 2-part epoxy.
Dispensing Cyanoacrylate in bonding applications.
Applying a of UV lacquer in CD/DVD spin coating applications.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Part Number: TS5624DMP
Size (Imperial): See drawing
Size (Metric): See drawing
Weight: 0.25 lb (113g)
Fluid Inlet Port: Luer lock female
Fluid Outlet Port: Luer lock male
Aux Air Inlet Port: 10-32 UNF female
Activation Pressure Range: 70 psi - 90 psi (4.8bar - 6.2bar)
Max Fluid Pressure: 60 psi (4.1bar)
Operating Frequency: 400+ cycles/min.
Mounting Port: 10-32 UNF female
Viscosity Range: 1 - 50 000cps
Wetted Parts: Black Polyethylene Compound
Items are shipped in the UK tracked courier.
The TS5600 series require little maintenance other than the replacement of the fluid lines, input fittings and tips.
Typical Applications
Diaphragm valves are used for many varied assembly and production processes where controlled deposits of low to medium viscosity liquids need to be applied. Common applications include:-
Dots and beads of Cyanoacrylates
Dots and beads of solvents
Dots and beads of UV cure
Dots and beads of PVA glues
Deposits of liquid fluxes
Dots and beads of threadlockers
General adhesive application
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Ideal for cyanoacrylatess
- High precision solution supplied complete
- Repeat dots, lines or potting of most liquids
- Adjustable stroke control for fine tuning of flow
- Syringe feed, cartridge feed or pressure pot
- Supplied with fluid lines and tip kit
- Easy bench mount, machine mount or robot mount
- Simple to control using TS500R, TS250 or TS350
|
|
|
|
|
|
|
|
|
