The TS5600 Series dispense valves accurately control the application of most low to medium viscosity fluids without drips. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to 0.025") allows for a fast response with positive shutoff. Wetted components are made of inert plastics.

Takes a direct feed from any pressure pot, cartridge or syringe and includes a selection of flexible fluid line tubing and connectors. Model TS5623HU with UHMW* polymer wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. Use the Delrin version for UV cure adhesives. This version is a manual hand held valve (non-timed) that will accept a direct feed of adhesive or liquid from a pressure pot.

---

Part ID: TS5623HU

Wetted Materials: UHMW, PTFE
Size: 88mm L x 27mm Diameter
Weight: 118g (0.26lb)
Viscosity Range: 1 - 50,000 CPS
Flow Rate (water): 7250ml/minute @ 100 psi
Max Fluid Pressure: 70 psi ( 5 Bar)
Material Inlet: 1/8" NPT
Material Outlet: 1/4-28 UNF
Warranty: 1 Year
Commodity Code: 90289090

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

• Part ID: TS5623HU
• Wetted Materials: UHMW, Teflon�
• Size: 88mm L x 27mm Diameter
• Weight: 118g (0.26lb)
• Viscosity Range: 1 - 50,000 CPS
• Flow Rate (water): 7250ml/minute @ 100 psi
• Max Fluid Pressure: 70 psi ( 5 Bar)
• Material Inlet: 1/8" NPT
• Material Outlet: 1/4-28 UNF
• Warranty: 1 Year

Shipment of this productis by tracked courier . Maintenance of this product The TS5600 series require little maintenance other than the replacement of the fluid lines, input fittings and tips. Typical Applications Diaphragm valves are used for many varied assembly and production processes where controlled deposits of low to medium viscosity liquids need to be applied. Common applications include:- Deposits of Cyanoacrylates Deposits of solvents Deposits of PVA glues Deposits of liquid fluxes Deposits of threadlockers General adhesive application What's Included? The TS5600 series valves are supplied with a starter kit. The parcel will arrive with:- 1 x valve 1 x clear luer lock fluid line 1 x black luer lock fluid line 1 x input fitting 5 x assorted dispense tips 1 x tip cap seal 1 x user guide.


Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.