Join our mailing list!




  Home > Equipment > Dispense Valves > Pinch Valves >

TS1212 Air Operated Pinch Tube Valve
TS1212 Air Operated Pinch Tube Valve
Stand ordered separately


 
Alternative Views:


Price: £180.83 Exc VAT

Stock Status:In Stock
Availability:: Ships in 24 Hours
Product Code: TS1212
Qty:

Description Technical Specs More Info
 
The pinch tube valve is a compact and cost effective device for dispensing very thin liquids, semi-viscous materials, cyanoacrylates, anaerobics, solvents, UV cure adhesives and two-component fluids. For repeat dots, beads or potting of liquids fed from a syringe, cartridge or pressure pot. The only part of the valve that makes contact with the liquid is the low cost replaceable pinch tube assembly. This makes the TS1212 valve ideal for aggressive or curable liquids with no risk of the material setting and damaging expensive parts.


Compact and easy to set up, this valve is operated by any of our valve controllers. The controller provides a timed pulse of air pressure to open the TS1212 pinch tube, allowing the adhesive or liquid to flow. A spring loaded shut-off provides the ability to make micro dots if required with no drips between shots. The shot size is determined by the time setting on the controller, the fluid pressure, the amount of opening set on the adjustable stroke control and the size of needle tip used.

For complete systems, we offer a range of options including TS1212 valve, pressure pot and controller. The connecting link between reservoir and the TS1212 is a fluid line that offers a safe luer lock connection and is suitable for use with most liquids and adhesives. Use Teflon lined or Teflon tips for cyanoacrylates, General Purpose tips for other fluids and Tapered tips for viscous liquids. Please note the stand is ordered separately and is not included.

Size: 83mm L x 40mm Diameter
Weight: 82g
Wetted Parts: Polyethylene
Viscosity Range: 1 - 45,000 CPS
Min Shot Size: 0.007 cc/ ml
Repeatability: +/-0.56%
Flow Rate: Up to 2 Litres/minute @ 60 psi (water)
Max Fluid Pressure: 60 psi ( 4 Bar)
Material Inlet: Female Luer Lock
Material Outlet: Male Luer Lock
Valve Mounting: 1/4" 20UNC-2B
On/Off Pressure: 50 psi (3.4 Bar) Minimum
Warranty: 1 Year

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd does not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.


Features
  • Ideal for cyanoacrylates, UV cure and anaerobics
  • Zero cleanup with replaceable pinch tubes
  • Low cost dispensing solution supplied complete
  • Controlled deposits, lines or potting of most liquids
  • Syringe feed, cartridge feed or pressure pot
  • Supplied with pinch tubes, fluid lines and tip kit
  • Easy bench mount, machine mount or robot mount
  • 1 Year Warranty

Related products...
Tubes for TS1212 Valve 1212-004-002BK
Price: £35.03 Exc VAT

Add
Pinch Tubes for TS1212 Valve 1212-004-002BPK
Tubes for TS1212 Valve 1212-004-002PK
Price: £31.78 Exc VAT

Add
Pinch Tubes for TS1212 Valve 1212-004-002PK
36" Clear Luer Lock Fluid Line TSD126-336PK
Price: £38.20 Exc VAT

Add
Fluid line 36" clear female to male luer lock TSD126-336PK
Digital Timed Dispenser 0-100 psi Model TS250
Price: £322.87 Exc VAT

Add
TS250 Dispenser
500 Gram Pressure Pot 0-60 psi regulator # TS1215

Add
TS1215 Pressure Pot 500g


Browse for more products in the same category as this item:

Equipment > Dispense Valves > Pinch Valves