 |
 |
 |
|
Barrier style Techkit, 6oz size. Includes TS60C Cartridge, TS1WP Plunger, TS2C Flange Cap, 600-310 Head, 600-100 Rod.
The Techkit is a compact and simple method of packaging two or three component resin systems into a 2.5oz (74ml), 6oz (177ml), 8oz (237ml), 20oz (591ml) or 1/10 gallon (325ml) cartridge. The kit mechanically separates the base and hardener until they are ready to be used. An internal mixing head provides a thorough blend for all types of compounds. Use with cartridge dispensing guns. When the job has been completed, the entire package is disposed of: no clean up or physical contact with the resin.
Cost savings are achieved by reducing labor and material waste. Reliability is increased with accurate compound ratios, complete mixing and proper application techniques. Three types of kits are available: Barrier, Injection and Barrier/Injection types.
Barrier Type
For compounds with a volumetric ratio greater than 10 parts per 100. The catalyst and base are separated by an aluminum barrier formed over the mixing head.
Injection Type
For compounds with a volumetric ratio of 10 parts or less per 100. The catalyst is contained inside the valved mixing rod while the base is in the cartridge.
Barrier/Injection Type
For three component compounds, components of both Injection and Barrier are combined.
Product Comprises of: cartridge, impeller, mixer rod, plunger, end cap. This is a pack of 50 kits. Does not include the foil seal bag. 6oz is 177cc or 177ml size approx.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Use with 6oz air or manual guns
|
|
|
|
|
|
|
|
|
