700 Series - Red Straight‑Wall Piston for 3cc Syringe Barrels (7030006RPK) - Pack of 1000
The 700 Series is a premium range of dispensing syringe barrel components designed for use with both manual applicators and pneumatic dispensers. All components are silicone‑free and chloride‑free, ensuring compatibility with sensitive adhesives and delivering reliable accuracy, repeatability and productivity across industrial assembly processes. The range includes sizes 3cc, 5cc, 10cc, 30cc and 55cc.
The red straight‑wall piston is engineered to provide smooth, controlled dispensing by distributing pressure evenly across the fluid surface. Its straight‑wall design is recommended for high‑viscosity materials, helping reduce stringing, bouncing, and inconsistent flow during dispensing. Dual wiping edges prevent dripping and minimise material waste by keeping the barrel wall clean as the piston travels.
Rated for up to 100 psi (6.9 bar), these pistons are suitable for demanding production environments and are supplied in sealed packs of 50 or 1000.
Key Features
-
Straight‑wall piston for 3cc syringe barrels
-
Ideal for high‑viscosity adhesives, sealants and pastes
-
Reduces stringing, bouncing, and inconsistent flow
-
Dual wiping edges prevent drips and minimise waste
-
Ensures even pressure distribution for controlled dispensing
-
Compatible with Techcon 700 Series barrels
-
Rated safe to 100 psi
-
Supplied in packs of 50 or 1000
-
Manufactured from polyethylene
-
Silicone‑free and chloride‑free
Technical Specifications
Applications
Suitable for dispensing:
Ideal for electronics assembly, automotive manufacturing, aerospace, medical device production, laboratories, and precision adhesive packaging.
About Adhesive Dispensing Ltd
Adhesive Dispensing Ltd provides a wide range of precision dispensing equipment for almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies. All components ship directly from stock with full quality assurance.
- Material: Polyethylene
- Colour: Red
- For Barrel Size: 3cc
- Height: 8.00 mm
- Outer Diameter: 9.58 mm
Use this piston with the 3cc 700 series barrel 7030LL1NPK. It is ideal for general use with stringy and viscous pastes.
Pistons are made of plastic to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel.
Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance. Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment.
Barrels are shipped with every new dispenser and syringe gun that we supply. Barrels are moulded in high density polypro and have much thicker walls than a medical grade syringe. The internal bore has no taper and this ensures the wiper piston moves consistently down the barrel without restriction. The wide flanges at the top are for quick attachment to the air adapter assembly (to a dispenser) or to a manual syringe gun. This design ensures syringe barrels do not come loose or break under air pressures up to 100 psi. The luer lock tip attachment provides secure dispensing under high pressure.
Pistons have blades to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. The blades also act to stop liquids from going past them as they dispense. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel. Pistons can provide a barrier seal for liquids placed inside. But for more protection when dispensing watery liquids and cyanoacrylate adhesives, use our filter trap in the airline adapter assembly to your syringe dispenser.
|
