Flexible dispensing bottles for applying most low to medium viscosity fluids, fluxes, adhesives, primers, henna inks, PVA glues and coatings. All bottles feature a detachable cap with a luer lock hub. This cap allows the use of all standard tips, tapered tips and can also be used with a brush tip for coating or spreading fluids. Bottles are supplied in sealed packs of 10. The tips supplied are part AD25TT red tapered tips with an outlet hole inner diameter of 0.25mm. The bottle and cap can also be used with any other luer lock dispensing tip.
For more viscous pastes, gels, epoxies and compounds, please use our syringe guns. Bottles are also available supplied with a selection of dispensing tips and caps.
The luer lock cap pushes onto the 1 oz size bottle and accepts any luer lock type needle tips. Suitable for flux, solvents, adhesives, inks and solder mask. A low cost and simple dispensing solution for low viscosity liquids. Ten bottles and caps supplied in each bag ordered. Cap can be sealed using tip cap supplied.
MPN: AD1BC
Material: Low Density Polyethylene (LDPE) Bottle, High Density Polyethylene (HDPE) Cap
Body Colour: Natural
Volume: 30ml (1oz)
Commodity Code: 39269097
Brand: Adhesive Dispensing Ltd
Pack Size: 10 Pieces
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Material: Polyethylene
Body Colour: Natural
Volume: 30ml (1oz)
Cap: Nylon
Pack Size: 10
This bottle is for industrial use. Bottles and caps are supplied in sealed packs with product label. All tips will attach to luer lock bottles by twisting on. Silicone-free means that the bottles will not contaminate any adhesive or fluid dispensed from them. Do not use this product with thick pastes, (consider our syringe guns). Typical fluids dispensed with these tips include glues, solvents, anaerobics, lubricants, gels, fluxes, epoxies, nks, PVAs, etc.
|
