Flexible dispensing bottles for applying most low
to medium viscosity fluids, fluxes, adhesives, primers, vaping fluids, henna
inks, PVA glues and coatings.
All
bottles feature a detachable cap with a luer lock hub. This cap allows the use
of all standard tips, tapered tips and can also be used with a brush tip for
coating or spreading fluids. Bottles are supplied in sealed packs of 10.
For dispensing thick and more viscous pastes, gels,
epoxies and compounds, please use our syringe guns.
Bottles are also available supplied with a selection of dispensing tips and
caps. The luer lock cap pushes onto the 8oz size bottle and accepts any luer
lock type needle tips. Suitable for flux, solvents, adhesives, inks and solder
mask. A low cost and simple dispensing solution for handling
low viscosity liquids. Ten bottles and caps supplied in each bag ordered. Cap
can be sealed using tip cap (below right).
240ml (240cc) or 8oz Capacity
Thread Sze 28-410 for Cap
Natural Colour Body/ Black Cap
Male Luer Lock Cap
Silicone-Free
Medium Density Polyethylene (LDPE) Bottle, High Density Polyethylene (HDPE) Cap
Commodity Code: 39269097
Band: Adhesive Dispensing Ltd
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
- 240ml (240cc) or 8 oz capacity
- Medium density polyethylene body/ nylon cap
- Thread size 28-410 for cap
- Natural colour body/ black cap
- Male luer lock cap
- Silicone-free
This bottle is non sterile. Bottles and caps are supplied in sealed packs with product label. All tips will attach to luer lock bottles by twisting on. Silicone-free means that the bottles will not contaminate any adhesive or fluid dispensed from them. Do not use this product with thick pastes, (consider our syringe guns). Typical fluids dispensed with these tips include glues, solvents, anaerobics, lubricants, gels, fluxes, epoxies, inks, PVAs, etc.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
|
