Recirculatory A2 size filter unit for aerosol adhesives, lacquers, solvents, paints, solders, particles and dust. Filtration of particles down to 5 micron. Carbon fibre filter assists in the reduction of solvent odours. Easy to use system. Includes fan with particle and carbon filters.
The workstation hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Steel construction finished in dove grey - fan/filter unit mounted onto hood enclosure - particulate filter - carbon impregnated fibre filter - axial fans, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters.
* 110V 60Hz version available if required.
All filtration systems and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. These units can be used in two positions.
For artwork applications, standard A2 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding etc.
* 2 Year Warranty against fault and malfunction. Please see warranty terms and conditions. CE certified. UK manufactured products.
Part ID: A200H
Fan Motor Spec: 230V 50Hz 105W
Air Volume at Free Air: 325 m3/hr
Air Velocity at Filter Face: 0.50 m/sec
Air Velocity at Hood Face: 0.25 m/sec
Noise Level: 59 dB (A)
Weight: 62 kg
Dimension: 670 x 525 x 450 (wxhxd) [internal] 680 x 600 x 450 (wxhxd) [overall]
Commodity Code: 90289090
Origin: UK
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: A200H
- Fan Motor Spec: 230V 50Hz 105W
- Air Volume at Free Air: 325 m3/hr
- Air Velocity at Filter Face: 0.50 m/sec
- Air Velocity at Hood Face: 0.25 m/sec
- Noise Level: 59 dB (A)
- Weight: 62 kg
- CE Certified
The particulate (intake) filter is a three stage graduated fibre filter with a high �dust� holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced.
These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants. They are not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas.
Demonstrating adequate control of the risks to the health of employees, students and the general public, from mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH).
2 Year Guarantee. We take great care in the supply of high quality, robust and reliable equipment. We provide a 5 Year guarantee for this fume product.
Please read the terms and conditions of your guarantee (below), confirm acceptance, then return the form supplied with the system to register your product.
Terms and Conditions of Lifetime Guarantee
In the unlikely event of any machine supplied by the Company being found to be defective, the Company shall be responsible for the repair free of charge for labour and materials or (at its discretion) replacement of the machine. The lifetime guarantee will be invalidated after 12 months from the date of delivery if any of the following conditions are not met.
- Filters must be replaced as recommended, ie carbon and particulate filters should be changed at least every 6 months. If the machine is constantly in use, then particulate filters should be changed more frequently.
- Only genuine replacement filters supplied by us should be used.
- Machines must not be overloaded or used improperly.
- The correct electrical supply (as specified) must be used at all times.
- Naked flames and sparking devices must be kept well away from extraction cabinets.
- All filter elements must be fitted correctly.
- Filters must never be turned around as already deposited particulates may break off and contaminate the carbon filter and/or fans.
- No unauthorised repairs shall have been made to the machine.
* with the exception of spray tanning, arm based solder extraction and downdraught benches where a standard one year guarantee applies.
These systems are shipped by tracked courier.
|
