The A260S re-circulating spray booth is bigger than the AD300S and with its 2 external rotor axial fans, it�s as powerful as the more expensive A200S. It can take up to B3 size part work, which is between an A3 and an A2 size 3.
The A260S is portable and an ideal air filtration solution for hobby work shops, design and technology classrooms, as well as airbrushing demos in shops or during exhibitions and shows.
This is a re-circulating unit, and doesnt require an external vent. Instead, it is fitted with activated carbon fibre filter, which makes it suitable for use with solvent fumes.
Uses include filtration of:
Solvent fumes and mist from aerosol adhesives, aerosol lacquers, fixatives and airbrush spray paints.
The A260S re-circulating spray booth can be used in two positions:
Reclining (on back stand) - ideal for spray mounting artwork or applying lacquers or fixatives.
Upright: For airbrushing models, light grinding particles, sanding and general solvent dilution.
A260S Applications:
Craft
Hobby
Scale model painting
Airbrush painting
Light grinding particles and dusts
Cleaning solvents
*Can be used in laboratories handling fine powder when purchased with a HEPA filter.
This unit is designed predominantly for studio, D&T classrooms, workshop cleanliness and for immediate operator protection against concentrations of airborne contaminants. They are not recommended for continuous usage such as production applications, particularly in confined and/or badly ventilated areas. (See extraction cabinets A300S-D, A200H, & A100H-D for complete vapour extraction for higher specification filtration.)
Key Features
Portable design, all you need is a workspace or trolley to place it on
Quiet operation
High quality construction
Specifications
Weight: 27.5 kg
Dimensions: 610x490x495mm (WxDxH)
Description: Steel construction finished in black - plastic replaceable spray/fume shield - back stand / carry handle - particulate filter - carbon impregnated fibre filter - axial fan, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters.
Air Volume at Free Air: 610 m3/hr
Ave. Air Vilocity at filter face: 0.50 m/sec
Ave. Air Velocity at Hood Face: 0.35 m/sec
Fan Motor Spec: 230 V 50Hz 80W, 115V 60Hz 90W
Noise Level dB(A): 61 db(A)
What's included with the A260S?
Filter unit with fan(s) and back stand attached
Spray Shield
1 x Particulate filter
Charcoal Impregnated fibre filter
Power Lead
Data/Warranty Booklet
2 Year Guarantee
All filtration and extraction systems carry a 2 Year guarantee.
How does the filter extract dangerous contaminants?
The particulate (intake) filter is a three stage graduated fibre filter with a high dust holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced.
Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH). For LEV information for employers visit the HSE website.
