 |
 |
 |
|
Cartridge Sets for Two-Component Adhesives
The dual system is available in 50ml, 200ml and 400ml sizes. All 3 systems - 50ml, 200ml and 400ml, are available in 1:1, 2:1, 4:1 and 10:1 mix ratios and take a variety of mixer nozzles. Both components are stored in the two chambers of the dual cartridge system and are then dispensed simultaneously through the static mixer, where thorough mixing takes place.
The static mixer nozzles are available in different sizes with different volumes and a variety of mixing elements. One of the main benefits of the system is that not all of the contents of the cartridge have to be mixed at a time. The cartridge can be easily closed and stored for further use, without the material curing. Packs include the cartridge, wiper pistons and cap seals. Compatible with industry standard guns.
Dual cartridges are supplied in packs of 50 and include tip cap seal with 100 of the correct ratio pistons. The pistons in this kit are the solid type with EPDM rubber O-ring. These have an outer rubber O-ring and are especially good for use with doming resins.
Part ID: 116606 - AA 050-01-10-05
Materials: Polypro Cartridge/ HDPE Solid Piston/ EPDM O-Ring
Colour: White
Cartridge/ Grey Piston/ White Cap
Size: 50ml (25ml + 25ml)
Ratio: 1:1 (by volume)
Outlet: Bayonet Nozzle Attachment
Maximum Pressure: 100 PSI
Details: Industrial Grade, Silicone Free
Commodity Code: 39269096
Brand: Sulzer Mixpac MedMix
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: 116606 - AA 050-01-10-05 Material: Polypro Colour: White
- Size: 50ml (25ml + 25ml)
- Ratio: 1:1
- Outlet: Bayonet nozzle attachment
- Details: Industrial grade, Silicone Free
Dual Cartridges are designed to work with most two part epoxies, silicones and other materials.
This 1:1 cartridge set can be used with the following dispensing guns. For a manual gun, use part code ABM-25M1. For a pneumatic gun, use part code ADCBA-25D.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Solid disc piston EPDM O-ring Industrial grade safe to 100 psi
- Supplied with pistons and caps
- In sealed packaging
- Quick nozzle attachment
|
|
|
|
|
|
|
|
|
