 |
 |
 |
|
The PPD-130 peristaltic pump dispenser transfers low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
The PPD-130 peristaltic pump is a type of positive displacement dispensing machine used for pumping a variety of materials. The fluid is contained within a flexible Teflon tube fitted inside a circular pump casing. The special rotor turns and compresses the flexible tube thus forcing the fluid to be pumped to move through the tube. The digital timer allows you to dispense accurate and repeated amounts of fluid every time. The pumped fluid contacts only the inside surface of the tubing. There are no other valves, O-rings, seals or packings to worry about in a peristaltic pump so it is zero maintenance. No requirement for compressed air. Liquids are drawn direct from any bottles, cans, manufacturers bottles and along the supplied feed tubing without fatigue or error.
By not using compressed air, moisture sensitive adhesives such as Cyanoacrylates will perform better and will not prematurely cure or frost in the bottles. This system is supplied with a full starter kit including PTFE tubing nozzle kit, user guide and product manuals. And we'll assist with full technical support to ensure a quick setup.
Weight 6.6lbs (3kg)
Size: 182 x 171 x 82mm
Input Voltage: 110V to 220V 50/60 Hz
Dispense time: 0.01 - 99.99 seconds
Internal Voltage: 5VDC
Cycle initiation: continuous & timed
Rotor Speed: up to 120 rpm (max.)
Flow speed: 0.01 - 6ml/min. (Teflon tube) 0.1 - 20ml/min (silicone tube)
Dispense pressure: over 1.5Kg/cm2
Direction of pump: both direction (Forward / Reverse)
Snuff-back: programmable by reverse rotation
Digital display: time count down I/O: connection for remote operation
Adhesive Dispensing Ltd provide a wide range of
equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
Peristaltic Pump Dispenser
- Weight 6.6lbs (3kg)
- Input Voltage: 110V - 220V 50/60 Hz
- Dispense time: 0.01 - 99.99 seconds
- Internal Voltage: 5VDC
- Cycle initiation: continuous & timed
- Rotor Speed: up to 120 rpm (max.)
- Flow speed: 0.01 - 6ml/min. (Teflon tube)
- 0.1 - 20ml/min (silicone tube)
- Dispense pressure: over 1.5Kg/cm2
- Direction of pump: both direction (Forward / Reverse)
- Snuff-back: programmable by reverse rotation
- Digital display: time count down
- I/O: connection for remote operation
Accessories (included)
Part #: Qty Description:
562030-T 1 standard rotor for standard tubes
560989-B 1 nozzle holder (with switch)
561010-B 1 nozzle 1.5mm diameter
561011-B 1 nozzle 1.9mm diameter
561012-B 1 nozzle 2.4mm diameter
561013-B 1 nozzle 2.9mm diameter
560984A 1 hose 1 meter (3.28ft) 1.0 x 1.6mm
560985A 1 hose 1 meter (3.28ft) 1.4 x 2.0mm
560995A 1 hose 1 meter (3.28ft) 1.9 x 2.5mm
560996A 1 hose 1 meter (3.28ft) 2.4 x 3.0mm
562031 1 remote connector
562032 1 foot pedal (optional not included)
Spares and accessories are available to order here.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Air-free dispensing
- Snuff-back prevents post-dispense dripping
- Simple load mechanism also provides easy cleaning
- Manual or Timed modes
- Large digital LED display
- Clean room compatible
|
|
|
|
|
|
|
|
|
