Bayonet inlet, helical
static mixer nozzle for 50ml, 75ml and 100ml 1:1 and 2:1 mix ratio dual component cartridges.
Stepped outlet for precision that can also be cut back to increase orifice size and
increase flow rates. These mixer nozzles are suitable for all
two-component materials. They have white elements and are constructed
of high grade polypropylene. High quality mixer nozzles for use with
twin cartridges.
Supplied in a sealed pack of 100 nozzles.
All items are industrial grade safe and silicone free. Use with bayonet style dual cartridges.
Part ID: MA5.4-07S - MAH 05-07T - 102369
Material: Polypropylene
Colour: Natural Outer, White Elements
Inner Diameter: 5.4mm
Outer Diameter: 8mm
Total Length: 56mm
Tip Outlet Diameter: 1.5mm
Number of Mix Elements: 7
Retained Volume: 0.8ml
Maximum Pressure: 100 PSI
Details: Industrial Grade, Silicone Free
Commodity Code: 39269097
Brand: Sulzer Mixpac (MedMix)
About MIXPAC MAH, MAQ Mixers
MIXPAC MAH and MIXPAC MAQ mixers are used with MIXPAC A-System 50ml (and 75ml/ 100ml with 1:1 ratio) two-part cartridges, and are compatible with many other systems. They have a simple twist lock bayonet fitting for mounting on the cartridge. The mixers first element automatically aligns itself with the dividing wall of the MIXPAC cartridge, separating Part A and Part B, preventing cross-over at the interface of the cartridge. They are available in round/ helical version and square QUADRO versions. There are versions with stepped outlet tips, tapered outlet, straight outlet and luer slip outlet tips. MIXPAC MAH and MAQ static mixing nozzles are used to dispense two-part adhesives and materials such as epoxy, polyurethane, acrylic, doming resins and MMA methacrylate. These mixers were formerly sold under the Sulzer Mixpac brand name. Adhesive Dispensing Ltd have been distributing Medmix products for over 15 years.
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: MA5.4-07S
- Material: Polypropylene
- Colour: Natural Outer, White Elements
- Inner Diameter: 5.4mm
- Elements: 7
- Details: Industrial grade, Silicone Free
High density moulded static mixer nozzles with bell attachment to cartridges or machines. Stepped end design for direct dispensing or attachment of reducer fitting when using small luer lock needle tips. Silicone free and industrial grade.
All nozzles are safe for use up to 100 psi pressure. Nozzles are precision manufactured for industrial use. All nozzles are certified silicone-free to prevent contamination of any liquids dispensed from them.
|
