J2400 Series desktop robot dispensers
Dispensing robots
automate most fluid assembly processes providing exact fast and repeatable
deposits without mess, waste or errors. For making repeat dots, beads, arcs
and circles with any fluid, adhesive or paste. Easy to setup and
run and these systems are supplied with syringe dispenser as standard.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies. |
|

|

Model I&J2400N industrial robot has a dispensing area of 15.75 x
15.75 inches (400 x 400mm), but the footprint is less than 25 inches
(629mm) square for mounting on a standard workbench. The system is
easily programmed using a teach pendant or an optional Windows software.
Model I&J2400N is a popular dispensing robot in the I&J2000
bench robot series and can accept dispensing valves and syringes with
tooling loads of 11Kg and 6Kg. J2400 series robots
have a maximum base work area of 400mm x 400mm. In 3 or 4 axis
indexing. The 3 axis will allow the head to index vertically to a height of 50mm as it moves X & Y. And
4 axis for 360 degree head rotation (R) to dispense to the sides of components or around edges. All robots are supplied with a digital syringe
controller, I/O cable, CE compliance start/ stop box, teach pendant,
airline hoses, syringe bracket, slide adjustment and detailed
instruction manuals. Ready to use out of the box with comprehensive 1 Year warranty and detailed product/ technical support. Features:
Dispense area 15.75" x 15.75" (400mm x 400mm)
Repeatability 0.01mm for precise dispensing
No computer skills required
255 programs, 30,000 points of data to internal memory
Available in two, three and four axis models
Continous path motion for accurate XYZ dispensing
Interpolates lines or arcs for three-dimensional dispensing
Teach Pendant and (optional) PC programming Accessories:
J2000N-T - Teach Pendant (Included)
J2000N-WIN - Windowsฎ Software (Optional)
561320-110V - I/O Control Box for up to five dispensers Models:
I&J2400N-1: 3-Axis Robot 110V
I&J2400N-1CE: 3-Axis robot 110V CE
I&J2404N-1: 4-Axis Robot 110V
I&J2404N-1CE: 4-Axis Robot 110V CE
I&J2400N-2: 3-Axis Robot 220V
I&J2400-2CE: 3-Axis Robot 220V CE
I&J2404N-2: 4-Axis Robot 220V
I&J2404N-2CE: 4-Axis Robot 220V CE I&J2400N 3-Axis Robot
Operating Range: X-Axis: 400mm, Y-Axis: 400mm, Z-Axis: 150mm
Maximum Load: Worktable: 24.2lbs, Tool: 13.20lbs
Speed PTP: X & Y Axis: 8-800mm/sec, Z-Axis: 3.2-320/sec
Speed CP: X, Y, Z Combination: 0.1-800mm/sec
Repeatability: ฑ0.007mm per axis
Resolution: X & Y Axis: 0.0050mm, Z-Axis: 0.0025mm
Data Memory Capacity: 255 programs; 30,000 points
Drive System: 5-phase stepping motor
Operation System: Point to Point and Continuous Path
Interpolation: XYZ simultaneous (CP) 3D linear interpolation
Teaching Method: Remote & Manual Data Input (MDI) teaching
PLC: 50 programs, 100 steps for each program
I/O Signals: 16 input & 16 output signals
External Interface: RS232C - one channel for PC, one channel for the teach pendant and one channel for external equipment (optional)
Power Supply 100V: AC 90-132V consumption 200VA
Power Supply 220V: AC 180-250V consumption 200VA
Working Temperature: 0-40ฐ C
Realitive Humidity (No Condensation): 20-95% no condensation
Dimensions: 22.99" x 24.76" x 31.46"
Weight: 92.4lbs.
I&J2404N 4-Axis Robot
Operating Range: X-Axis: 400mm, Y-Axis: 400mm, Z-Axis: 150mm, R-Axis: ฑ360ฐ
Maximum Load: Worktable: 24.2lbs, Tool: 13.20lbs
Speed PTP: X & Y Axis: 8-800mm/sec, Z-Axis: 3.2-320mm/sec, R-Axis: 8-800ฐ/sec
Speed CP: X, Y, Z Combination: 0.1-800mm/sec
Repeatability: X, Y, Z Combination: ฑ0.01mm, R-Axis: 0.004ฐ
Resolution: X & Y Axis: 0.0050mm, Z-Axis: 0.0025mm, R-Axis: 0.009ฐ
Data Memory Capacity: 255 programs; 30,000 points
Drive System: 5-phase stepping motor
Operation System: Point to Point and Continuous Path
Interpolation: XYZ & R simultaneous (CP) 3D linear interpolation
Teaching Method: Remote & Manual Data Input (MDI) teaching
PLC: 50 programs, 100 steps for each program
I/O Signals: 16 input & 16 output signals
External Interface: RS232C - one channel for PC, one channel for the teach pendant and one channel for external equipment (optional)
Power Supply 100V: AC 90-132V consumption 200VA
Power Supply 220V: AC 180-250V consumption 200VA
Working Temperature: 0-40ฐ C
Realitive Humidity (No Condensation): 20-95% no condensation
Dimensions: 22.99" x 24.76" x 35.03"
Weight: 94.6lbs.
Please contact us for pricing and lead times.
|
Air-Powered
Dispensers * Industrial Dispensing Components * Syringe Barrels *
Cartridges * Tips * Nozzles * Robots * Mixers * Hot Melt Dispensers * Adhesives
* Epoxies * Cyanoacrylates * UV Cure * Anaerobics * Epoxies * Silicones
* Packaged Components * Techkits * RatioPacks * Hingepacks * | |
|