Non-Timed Pneumatic Dispenser 0-100 psi Regulator
& Gauge
Floor mounted pneumatic adhesive and paste syringe
dispenser. With an adjustable 0-100 psi regulator. Three way air valve for
quick shut-off prevents fluid oozing when pedal released. Operator controls
deposit output. Press the pedal for flow, lift off to stop.
Suited to controlled dispensing of most medium to
high viscosity pastes and fluids, sealants, RTV, grease, gels, epoxies,
mastics, sealants and potting compounds. Supplied with a syringe adapter
assembly with 6ft long air hose, barrels, pistons and needle tips. Please
select the syringe size starter kit to ship with the dispenser.
As this systems is fully pneumatic, it is suitable
for use in hazardous and explosive environments. Supplied with airline hose.
Also available dispenser without vacuum suck-back (Model DB815) which is for pastes only.
Timer: None
Input Pressure: Up to 100 psi
Size: 215.9 x 114.3 x
136.65 mm
Weight: 1.72 kg (3.8lb)
Input Voltage: None (Pneumatic Only)
Warranty: 1
Year
Cycle Rate: None (Manual Only)
Timing Tolerances: n/a Meets or Exceeds: CE
Output Pressure: Up to 100 PSI
Commodity Code: 84249020
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing almost
all assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Timer: None
- Output Pressure: Up to 100 psi
- Input Pressure: Up to 100 psi
- Size: 215 x 114 x 136 mm
- Weight: 1.72kg (3.8lb)
- Input Voltage: None (pneumatic only)
- Warranty: 1 Year
- Cycle Rate: None (manual only)
- Timing Tolerances: n/a
- Meets or Exceeds: CE
This product is shipped with the following:
1 x DB815-SB footvalve dispenser
1 x airline hose with 1/4" male thread connect
1 x 30cc clear barrel (part code 7300LL1NPK)
1 x 30cc white wiper piston (part code 730009WPK)
1 x 30cc red end cap (part code 71000CRPK)
1 x black tip cap (part code 7015LLBPK)
5 x assorted dispensing tips
Order part code DB815 if a vacuum suck-back is not required. Do not use this product with watery liquids as it is floor mounted and more suited to dispensing pastes. Use TS250 dispenser for watery liquids. Suitable materials proven to work with this systems include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives and other assembly fluids.
|
