Join our mailing list!




  Home > Fume Removal Systems > Fume Filtration Systems >

BVX-203 Recirculatory Dual Arm Fume Extractor
BVX-203 Dual Arm Fume Removal System
BVX-203 Dual arm fume removal system


 
Price: £630.00 Exc VAT

Availability:: Usually Ships in 1 to 2 Weeks
Product Code: BVX-203
Qty:

Description Technical Specs More Info
 
Product Number: BVX-203
Specification: The BVX-203 is a twin station solvent fume extraction system giving powerful performance with complete portability. This system should be placed either under or by the side of the work bench. The rate of performance is based on the conditions of the filters. This unit incorporates an audible warning system highlighting to the operator if the extraction level is dropping below the recommended efficiency level. Switching the unit on or off is controlled by a foot switch. Air arms are ordered separately.
This system is fitted with:
- Pre Filter
- Main Deep Bed Gas Filter
The BVX-203 has been designed to remove and absorb gases from solvents and conformal coatings by utilising the activated deep bed carbon filter.

For applications that require a high capacity of gas filtration, such as cleaning with solvents or conformal coatings, the BVX-203 Fume Extraction System features a deep-bed gas filter.
The BVX-203 Fume Extraction System is a revolutionary two-arm unit that combines powerful fan performance with efficient filtration, quiet operation and complete portability. It can be placed under or next to the bench-top and is supplied fitted with two 50mm diameter x 710mm long BVX arms, extra 1.8m long hose, table bracket and clamps. Using the proven fan motor of the BVX-100 Series Fume Extraction Systems, the BVX-203 adds a proprietary one-stage impeller design that doubles the total free-blowing airflow. The result is a maximum free-blowing airflow of 250m3/h (150cfm), with a maximum suction force of 850 Pa (3.5"WC). This suction force provides ample capability in reserve to handle any clogging that may occur during the normal life of the filter. It is, in fact, the suction rating for this unit is one of the best in its class offered for such compact and portable systems.
The BVX-203 Fume Extraction System is designed mainly for adhesive fumes and incorporates both pre- and main-filters which can be changed independently to maximize the working life of each filter and lower the total cost of ownership. The main filter has a HEPA efficiency of 99.97% at 0.3 micron, plus an activated carbon filter to remove additional gases.
The new BVX-203 is a revolutionary two-arm filtration system that combines powerful fan performance with highly efficient filtration. The compact design and easy set-up make it truly portable. Depending on the application, two filter configurations are offered: HEPA filtration for solder fumes and gas-phase filtration for the removal of gases from solvents, conformal coating, etc. With a static pressure of 850 Pascal (3.5"WC) the filter unit delivers the suction force to assure a long filter lifetime and low operating costs. The air inlet ports allow the connection of 50 mm (2") or 63 mm (2.5") diameter exhaust arms
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
Fume extraction
Features
  • Compact and portable
  • High suction force and airflow
  • Deep-bed gas filter
  • Low noise level
  • Connects to 50 mm (2") or 63 mm (2.5") diameter exhaust arms
  • UL, CE and CSA certified
  • Supplied with 2 x BVX-ARML 750mm long arm hoses


Browse for more products in the same category as this item:

Fume Removal Systems > Fume Filtration Systems