Liquid Dispenser with Analog Timer, Vacuum Suck-back and Steady Mode

The ADL Model 100 is a cost-effective pneumatic syringe barrel dispenser. Its light weight and compact size makes this the ideal bench top dispensing solution for all your gluing, solder paste application and most other materials viscous or not. Its simplified construction and operation makes it easy for even someone that has never used a dispenser before. The unit comes with two modes; manual/pre-set timer.

By setting the timer, repeat deposits can be made from small dots to larger amounts. Press the steady mode and it will make continuous beads.

Features vacuum suck-back to prevent drips of watery liquids. Supplied complete with a syringe barrel assortment, needle tip kit assortment, adapter assembly, foot switch, power cord, user guide and CE certification. Covered by a 1 year warranty. This classic designed benchtop dispenser is simple to use and operate and we offer full technical support for setting up.

This compact dispenser sits on the bench and requires an air input from any compressor or factory mains supply. It comes with the airline hose and fittings kit to make air connection easy. Ready to use out of the box.

Each dispenser is supplied with (10) syringe barrels and (10) pistons in the size of your choice, a 3ft. long air adapter assembly, (1) reusable barrel end cap seal, (1) reusable luer tip cap seal and (50) assorted dispensing tips including smooth flow tapered and general purpose 1/2" long. SELECT THE SYRINGE BARREL SIZE REQUIRED.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

Part ID: ADL100
Timer: 0.01 - 18 seconds
Output Pressure: Up to 100 psi
Input Pressure: 80-100 psi
Size: 235 x 192 x 63 mm
Weight: 1.47 kg
Input Voltage: 220 V AC
Warranty: 1 Year
Cycle Rate: Up to 600 cycles/minute
Timing Repeatability: +/- 0.1%
Meets or Exceeds: CE Certified

---

• Part ID: ADL100
• Timer: 0.01 - 18 seconds
• Output Pressure: Up to 100 psi
• Input Pressure: 80-100 psi
• Size: 235 x 192 x 63 mm
• Weight: 1.47 kg
• Input Voltage: 220 V AC
• Warranty: 1 Year
• Cycle Rate: Up to 600 cycles/minute
• Timing Repeatability: ±0.1%
• Meets or Exceeds: CE Certified

This product is shipped with the following:

10 x Syringe Barrels Clear Luer Lock (select size with order from 3cc, 5cc, 10cc, 30cc or 55cc) 10 x Syringe Wiper Pistons White (size wll suit selected syringe barrel) 1 x Syringe Barrel End Cap (size will suit selected syringe barrel) 1 x Tip Cap Black Luer Lock 50 x Assorted Dispensing Tips

This dispenser will apply most fluids, adhesives, gels and pastes. Order optional filter trap (part code 881-000-000) in the air adapter hose between dispenser and syringe. if dispensing very watery liquids. This works as a safeguard against any potential fluids entering into the machine.

This product is supplied ready to connect to a compressed air supply/ compressor with regulator. Dispensers includes air pipes and connectors but not the compressor. Please register your dispenser to activate the 1 Year warranty and full technical support.

To assist with packing exact components (such as barrel colour, piston type, tip types, etc), you can send us a quick email to geek@adhesivedispensers.co.uk and just inform us of the liquid, gel, resin, adhesive, paste, etc. you intend to dispense. Such as Cyanoacrylate. UV cure, silicone, epoxy resin, solder paste, solvent, etc. Or by product code such as Loctite 406, Dow Corming 3140, etc.