Full extraction system A2 size unit for aerosols, adhesives, lacquers, solvents, paints, solders, particles and dust. Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to products up to A2 size. A2 drawing boards can be placed into the hoods at an angle for efficient overspray capture.
The workstation hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
* 2 Year Warranty. CE certified.
Part ID: A200H-D
Fan Motor Spec: 230V 50Hz 105W
Air Volume at Free Air: 355 m3/hr
Air Velocity at Filter Face: 0.60 m/sec
Air Velocity at Hood Face: 0.25 m/sec
Noise Level: 58 dB (A)
Dimensions: 670x525x450 (wxhxd) [internal], 680x600x450 (wxhxd) [overall]
Weight: 56 kg
Filters: Use Part IFA3
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: A200H-D
- Fan Motor Spec: 230V 50Hz 105W
- Air Volume at Free Air: 355 m3/hr
- Air Velocity at Filter Face: 0.60 m/sec
- Air Velocity at Hood Face: 0.25 m/sec
- Noise Level: 58 dB (A)
- Weight: 56 kg
Steel construction finished in dove grey � fan/filter unit mounted onto hood enclosure - particulate filter � centrifugal blower (A100H-D has 2 blowers) external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter. Flexi-duct(s) 2 metres x 100mm dia.
All WS filtration systems and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. These units can be used in two positions.
For artwork applications, standard A2 (A200H-D) drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture.
3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-duct(s) can be fixed to a standard domestic vent(s) or simply placed through a partially open window to facilitate portability or convenience.
|
