This product is a test kit enabling customers to approve a product prior to order larger packs. This kit contains a single part of bottle, blue cap, black tip cap and 23 gauge dispense tip 0.5" long. Ships direct from stock.
Premium squeeze bottle with bottle cap that
threads on top of screw-cap to create an air tight seal. For precise drops of flux, solder
mask, adhesives, silicones, glues, liquids and
oils. Great for dispensing flux for PCB's and many other applications.
Also suitable for
applying most low to medium viscosity fluids, adhesives, primers,
henna inks, PVA glues and coatings. The luer lock cap allows
the use of any standard tips, tapered tips and can also be used with a brush tip for
coating or spreading fluids. For
dispensng of thicker pastes, gels, epoxies and compounds, please use our syringe guns. Bottles
are also available supplied with a selection of dispensing tips and caps.
1 (one) bottle, 1 (one) luer cap, 1 (one) tip cap and 1 (one) 23 guage 1/2" long precision tip is supplied in each bag ordered. Available direct from stock. This bottle design is a boston round style in low density soft but robust plastic. Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- 60ml (60cc) or 2 oz capacity
- Low density polyethylene body/ nylon cap
- Natural colour body/ blue cap
- Male luer lock cap
- Orange precision dispensing tip
- Silicone-free plastics
This bottle is not for medical use. Bottles and caps are supplied in sealed packs with product label. All tips will attach to luer lock bottles by twisting on. Silicone-free means that the bottles will not contaminate any adhesive or fluid dispensed from them. Do not use this product with thick pastes, (consider our syringe guns). Typical fluids dispensed with these tips include glues, solvents, anaerobics, lubricants, gels, fluxes, epoxies, inks, PVAs, etc.
|