Join our mailing list!



Knowledge Base:  
You are here: Knowledge Base > TDS & MSDS
Technical Data Sheet (TDS) for GB95 Cyanoacrylate Adhesive
Last Updated: 20/04/2021

Product Description

GB95 is a general purpose cyanoacrylate, formulated to provide high tensile and shear strengths on a wide variety of substrates. This single component adhesive has an active cure mechanism, which when pressed into a thin film between two surfaces, will cure almost instantaneously to form a rigid thermoplastic.

Typical Applications

GB95 is used in a huge cross section of industrial applications. From OEM to MRO industries, this grade can be used on a variety of plastic, rubber and metal bonding applications including automotive, white goods and furniture manufacturing. Typical examples shown below:

* Bonding centre consoles, dashboards, weather stripping

* Bonding identification tags to equipment

* Bonding rubber pads to equipment base or legs

* Bonding components in a speaker cone

* Bonding leather and rubber during shoe manufacture

* Bonding fabric on lampshades


Instructions For Use

1. For best results clean all surfaces with a cleaning solvent and allow to dry fully.

2. Apply adhesive to one of the mating parts and assemble carefully.

3. Allow to fully cure before applying load.

4. Excess adhesive can be carefully cleaned up with cleaning solvents such acetone.

Properties of Uncured Material

Resin

Ethyl Cyanoacrylate

Appearance

Colourless Liquid

Viscosity

50cps

Cure System

Humidity


Performance of Uncured Material

Fixture Speed

< 7 Seconds @ 200C

Full Cure Time

24 hours @ 200C

Typical Strength

5 to 28 N/mm2

Gap Fill

0.1mm

Temperature Range

-550C to 820C


Packaging

GB95 is available in 3g, 20g, 50g and 500g HDPE bottles. In addition, we can offer automated dispensing lines for the bulk dispensing of this material.

Storage & Shelf Life

GB95 should be stored unopened in a cool dry location, out of direct sunlight. Stored correctly, this grade can offer a 12 month shelf life from manufacture.

Health & Safety in Use

GB95 is an ethyl cyanoacrylate and can bond skin and eyelids in seconds. This grade should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment, and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the users sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user as a result of the use of this product.



Was this article helpful?

Comments:
 

Related Articles
 > Safety Data Sheet (SDS) for GB80 Cyanoacrylate Rubber Toughened Adhesive
 > Safety Data Sheet (SDS) for UV01 UV Cure Adhesive
 > Safety Data Sheet (SDS) for DB50, DB100 Adhesive Debonder
 > Safety Data Sheet (SDS) for Dow Corning 781 Silicone Sealant
 > Technical Data Sheet (TDS) for EP9001 PU Resin 50ml 1 Minute Cure
 > Technical Data Sheet (TDS) for Dow Corning 744 Silicone Sealant
 > Technical Data Sheet (TDS) for EP95 5 Minute Epoxy Resin
 > Safety Data Sheet (SDS) for EP9001 PU Resin 50ml 1 Minute Cure Part B
 > Safety Data Sheet (SDS) for AD2005-1 PU Resin 50ml 1 Minute Cure
 > Technical Data Sheet (TDS) for EP2005-1 PU Resin 50ml 1 Minute Cure
 > Safety Data Sheet (SDS) for AC200S Cyanoacrylate Activator Liquid
 > Safety Data Sheet (SDS) for GB16 Cyanoacrylate High Viscosity Adhesive
 > Technical Data Sheet (TDS) for Dow Corning 3145 Silicone Sealant
 > Safety Data Sheet (SDS) for Dow Corning 3145 Silicone Sealant
 > Technical Data Sheet (TDS) for Dow Corning 3140 Silicone Sealant
 > Safety Data Sheet (SDS) for Dow Corning 3140 Silicone Sealant
 > Safety Data Sheet (SDS) for EP9001 PU Resin 50ml 1 Minute Cure Part A
 > Technical Data Sheet (TDS) for GB16 Cyanoacrylate High Viscosity Adhesive
 > Data Sheets (TDS) (SDS) for GB01 Cyanoacrylate adhesive
 > Data Sheet (TDS) for EP95 Quick Set Epoxy Resin
 > Data Sheet (SDS) for EP95 Quick Set Epoxy Resin