 |
 |
 |
|
The VMS400 is a mini spool valve engineered for dispensing high
viscosity fluids up to a maximum fluid pressure of 700 psi. The VMS400
is suitable for dispensing applications such as bead laying and sealing
operations.
The VMS400 can be used with the DSP501LF or TS250 Controller. For faster activation of the valve, the TS555R or VC-1195A Valve Controller is recommended. All valves are shipped with a luer lock fluid elbow fitting, airline hose with male quick connect, mounting attachment, tip cap end seal, selection of dispensing tips and user guide. Valves are supplied with a 1 Year warranty.
Operating Air Pressure: 60-90 PSI Material Delivery Pressure: Max 50kgf/cm2
Cycle Rate: 400 cycles/min
Minimum Shot Size: 0.1cc
Maximum Flow Rate: 5 Liters/min
Valve Weight: 255g
Driving part materials: Body: SUS303 Piston: SUS303 Spool: SUS420 CAP: AL (hard coated)
Dosing part materials: Chamber: SUS303 Chamber cap: SUS303 Seal: UHMW-PE Lip Seal
Connecting Ports: Operating Air inlet: M5xP0.8 Exhausting outlet: M5xPO.8
Material inlet: PT 1/8"
Material outlet: PT 1/8"
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Operating Air Pressure: 60-90 PSI
- Material Delivery Pressure: Max 50kgf/cm2
- Cycle Rate: 400 cycles/min
- Minimum Shot Size: 0.1cc
- Maximum Flow Rate: 5 Liters/min
- Valve Weight: 255g
- Driving part materials: Body: SUS303
- Piston: SUS303
- Spool: SUS420
- CAP: AL (hard coated)
- Dosing part materials: Chamber: SUS303
- Chamber cap: SUS303
- Seal: UHMW-PE Lip Seal
- Connecting Ports: Operating Air inlet: M5xP0.8
- Exhausting outlet: M5xPO.8
- Material inlet: PT 1/8"
- Material outlet: PT 1/8"
Typical materials dispensed from these valves include sealants, silicones, mastics, RTVs, pastes, gels, lubricants, flavourings, UV cure gels, fluxes, solder masks and greases.
Models
VMS400 Mini Spool valve
DSP501LF Dispenser 110V
DSPE501LF Dispenser 220V CE
VC-1195A Valve Controller 110V
VCE-1195A Valve Controller 220V CE
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Developed for dispensing high viscosity fluids such as lubricants, RTV, silicone, and sealants
- Designed for bead laying, sealant, and high pressure dispensing applications
- Suck-Back eliminates post-dispense "dripping"
- High pressure fluid input up to 700psi for high viscosity material
|
|
|
|
|
|
|
|
|
