Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun using standard 30cc/ 30ml size industrial syringe barrels. Ideal for remote dispensing, low volume production, re-work or repair work.

A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze. Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment.

This gun is for dispensing PVA glues. The barrels supplied are filled with a high quality water based white glue suited for bonding wood, paper and card, etc. .

Each Syringe Gun kit includes the 30cc manual hand gun, (10) 30cc dispensing reservoirs filled with PVA glue including the 30cc pistons, storage end caps and tip caps with (50) assorted luer lock dispensing tips.

Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 30ml gun is also available conveniently supplied complete with our full component kit.

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Materials: Polypro/ Nylon
• Capacity: 30cc or 30ml
• Length: 175mm
• Height: 135mm
• Weight: 110 grams
• Colour: Red Handle/ White Trigger
• Warranty: 1 Year

This product is shipped with the following: 20 x 30cc black barrel (part code 7300LL1BPK) 20 x 30cc white wiper piston (part code 730009WPK) 20 x 30cc red end cap (part code 73000CRPK) 20 x black tip cap (part code 7015LLBPK) 50 x assorted luer lock dispense tips

Order part code TS730SG if a the gun is required without a kit..Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.