Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 10cc/ 10ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. Ideal for applying solder paste, solder flux, RTV, silicones, sealants, gels, greases, compounds, PVA glues and other liquids.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 10ml gun is conveniently supplied complete with our full component kit.
Specifications:
Weight: 0.1kg/0.2lbs
Gun Length: 175.0mm
Maximum Thrust: 1.5kN
Handle Material: Glass Filled Nylon
Frame Material: Glass Filled Nylon
Tool Component Approvals: REACH
Cartridge Capacity: 10mL (10cc)
Mechanical Advantage Ratio: 7:1
Viscosity: Low/Medium
Standard Colour: Grey/Red
Commodity Code: 90289090
Materials: Polypro/ Nylon
Warranty: 1 Year
This 10cc gun is shipped with the following:
50 x 10cc clear luer lock syringe barrels
50 x 10cc white wiper pistons
50 x 10cc barrel end cap seals
50 x barrel tip cap seals black
5 x smooth flow tapered tip 14 gauge olive
5 x smooth flow tapered tip 16 gauge grey
5 x smooth flow tapered tip 18 gauge green
5 x smooth flow tapered tip 20 gauge pink
5 x smooth flow tapered tip 22 gauge blue
5 x precision 1/2" tip 14 gauge olive
5 x precision 1/2" tip 15 gauge amber
5 x precision 1/2" tip 18 gauge green
5 x precision 1/2" tip 20 gauge pink
5 x precision 1/2" tip 21 gauge purple
Do not use this product with CA adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste
Deposits of solder flux
Grease to lubricate bearings
PVA glue to small furniture joints
RTV to seal cases
Silicone deposits and beads
Gasket sealant and silicone repair
Shots of roach insecticides
General adhesive application
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Materials: Polypro/ Nylon
- Capacity: 10cc or 10ml
- Length: 175mm
- Height: 135mm
- Weight: 110 grams
- Colour: Red Handle/ White Trigger
- Warranty: 1 Year
This product is shipped with the following: 50 x 10cc clear barrel (part code 7100LL1NPK) 50 x 10cc white wiper piston (part code 710009WPK) 50 x 10cc red end cap (part code 71000CRPK) 50 x orange tip cap (part code 7015LLPK)
50 x various size dispense tips
Order part code TS710SG if a gun is required without the kit..Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
