Precision moulded 4.0 Inch long standard nozzle x 1/16 Inch (0.063 Inch) orifice. 1/4 Inch NPT thread to fit all standard dispensing cartridges as well as the spool valves. This nozzle is supplied pre-bent at 1 Inch from the outlet to a 45 degree angle.

This will provide a leak free connection to the range of nozzles. Nozzles are made from natural medium density polyethylene material and supplied in sealed packs of 1000.

---

Material: Polyethylene
Colour: Natural ID: 1/16" (1.59mm)
Length: 4 Inch (101.6mm)
Connection: 1/4 Inch NPT
Details: Industrial grade, Silicone Free
Commodity Code: 84679200
Pack Size: 1000

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TS416-B45/1-1000
• Material: Polyethylene
• Colour: Natural
• ID: 1/16" (1.59mm)
• Length: 4" (101.6mm)
• Connection: 1/4" NPT
• Details: Industrial grade, Silicone Free

Nozzles are designed to work with all industry standard industrial cartridges. Part TSD931-296 is required if using with pre-filled silicone and sealant tubes that feature and external thread nipple to cut. Nozzles are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds. All nozzles are safe for use up to 100 psi pressure. Nozzles are not for medical use but are precision manufactured for industrial use. All nozzles are certified silicone-free to prevent contamination of any liquids dispensed from them.


Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.