Liquid Dispenser with Digital Timer, Vacuum Suck-back and LCD Display
The TS250 system will
dispense virtually any assembly fluid and adhesive or liquid paste, from
thin, watery liquids and solvents to thick gels, silicones and brazing
pastes. All are applied quickly, accurately to reduce waste,
mess and hand fatigue.
This is a system available
with 0-100 psi adjustable air regulator for most fluids and pastes or
use the 0-15 psi version for watery liquids, watery, cyanoacrylates and
solvents. You hold the syringe like
a pen, adjust the air pressure to suit the liquid being dispensed then
press the foot pedal to apply. When the pedal is released, the
deposit instantly stops without drips or oozing. It is safe and simple
to use and reduces time spent manually applying liquids. The dispenser
is supplied with a user guide.
An adjustable vacuum
provides suck-back to the tip to prevent watery liquids from dripping.
We recommend the use of an inline filter on the air adapter to the
syringe when dispensing low viscosity fluids. The LCD display shows the timer which can be adjusted from 0.02 to 60
seconds for repeat deposits, down to micro-dots. A shot counter shows
the number of deposits made during a shift.
This
compact dispenser sits on the bench and requires an air input from any
compressor or factory mains supply. It comes with airline hose and
fittings kit to make connection easy. It will work with any power supply
and is supplied with plugs for use in most countries. Includes a
syringe stand, syringe and piston kit and needle tip kit selection. Ready
to use out of the box.
The
package includes:
1 x TS250 Digital Dispensing System
1 x 3cc Adapter Assembly with 3ft long Hose
50 x 3cc Clear Syringe Luer Lock Barrels
50 x 3cc Wiper Plastic Pistons
50 x 3cc End Cap Seals
50 x Tip Cap Seals
100 x Assorted Needle Tips
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
|