High quality cartridge reservoir made from low density polyethylene. 10 ounce/ 310ml size (1/10 gallon). Suitable for handling most materials, adhesives, sealants, pastes including solvent based fluids. Cartridge has 1.85" diameter and is 8.99" long. Used in cartridge guns or pressurised cartridge retainers. These products are supplied in a sealed pack of 250 parts.

The range of disposable plastic cartridges are available in 2.5, 6, 8, 12, 20, 32 oz. (approximate metric value 75, 177, 237, 355, 591, 960cc) and 310ml capacities. This version is in high-density natural polyethylene and so is suitable for use with most fluids & pastes. All cartridges feature a 1/4" NPT (6mm) female thread dispensing orifice for secure attachment of dispensing nozzles, tip adapter or threaded fittings. Use this caulking tube type cartridge with all 310ml sized caulk style dispensing guns.

Part ID: TS110C-LD-250
Material: Low Density Polyethylene (LDPE)
Colour: Natural
Maximum Pressure: 100 psi
Capacity: 10oz (310ml)
Length: 8.99" (228.3mm)
OD: 1.85" (47.0mm)
Maximum Pressure: 100 PSI
Details: Industrial Grade Safe, Silicone Free
Commodity Code: 39269097
Brand: TSI
Pack Size: 250 Pieces

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

• Part ID: TS110C-LD-250
• Material:Low Density Polyethylene
• Colour: Clear (natural)
• Max Pressure: 100 psi
• Capacity: 10oz (310ml)
• Length: 8.99"
• OD: 1.85"
• Details: Industrial Grade Safe, Silicone Free

Cartridges are designed for use with pneumatic dispensing equipment or manual guns. They are thick walled and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper plunger inside moves down without restriction to improve dispense performance.

Use these cartridges with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have 1/4" NPT end for screw on nozzle attachment. These products are safe for use up to 100 psi pressure. Barrels are not for medical use but are precision manufactured for industrial applications.

Components are certified silicone-free components and will not contaminate any fluids that are dispensed from them.

Suitable for...
	Adhesives
	Silicone's
	Epoxies
	Primers
	Solvents
	Lubricants
	Pastes