Hand operated manual syringe assembly with luer lock tip attachment supplied with stainless steel blunt end dispense tips 1.5" long. A multi purpose evaluation pack of clear 10ml/ 10cc manual syringes with luer lock dispensing tips.

Clear syringe barrel includes plunger rod and rubber piston. Luer lock twist-on tip attachment. Tips are 1.5" long blunt end wide bore 14, 15 and 16 gauge. A selection of 2 x 10cc syringe assemblies and 2 each of the tips. Non sterile manual 10cc/ 10ml size syringe barrel assembly. Natural (clear) barrel high density polypro. Luer lock for twist on attachment of needle tips.

Suited for use with most fluids, adhesives, solvents, primers, inks, paints, lubricants and activators. Clear barrel without graduations. SE series general purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. Tips are colour coded for gauge size. The tip features a slightly rounded internal design where the shaft meets the hub to improve fluid flow and reduce flow restriction. This allows for a lower pressure to be used for dispensing of liquids and pastes.

Please note that these items are shipped in sealed and labelled packs direct from stock.

---

Part ID: SA7989
Materials: Polypropylene/ Stainless Steel
Syringe Length: 3.55" - 90.17mm
Syringe Outer Diameter: 0.71" - 18.03mm
Syringe Inner Diameter: 0.63" - 16.00mm
Needle Tip Tube Length: 1.5" - 38.1mm
Connection: Luer Lock

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: SA7989
• Materials: Polypropylene/ Stainless Steel
• Syringe Length: 3.55" - 90.17mm
• Syringe Outer Diameter: 0.71" - 18.03mm
• Syringe Inner Diameter: 0.63" - 16.00mm
• Needle Tip Tube Length: 1.5" - 38.1mm
• Connection: Luer Lock

The kit includes: -

Part 410LL-1 Clear syringe luer lock 10ml or 10cc size x 2
Part 410L-2 Rubber wiper piston 10ml or 10cc size x 2
Part 410L-4 Plastic push rod 10ml or 10cc size x 2
Part TE714150PK 14 GA tip 1.5" long Olive 1.60mm ID x 2
Part TE715150PK 15 GA tip 1.5" long Amber 1.37mm ID x 2
Part TE716150PK 16 GA tip 1" long Grey 1.19mm ID x 2


Dispensing tips and syringe barrels are designed to work with most low, medium and high viscosity fluids, adhesives, inks, pastes, gels and lubricants. Syringe barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. This design ensures syringe barrels do not come loose from the tip. The luer lock tip attachment offers secure dispensing under pressure.

Items are shippedby tracked courier.