This part code is for a replacement EPR rubber O-ring for the TS1258 pressure pot. The standard O-ring supplied with the TS1258 pressure pot is Viton rubber and is intended for applications with lubricants, conductive and non-conductive adhesives and various other compounds not listed below. This O-ring may be cleaned with Toluene and/or Isopropyl Alcohol.

Part Code: TS1258-EPR
Type: Rubber O-Ring Seal
For: TS1258 Pressure Pot
Material: EPR Rubber
Colour: Black
Commodity Code: 40169300
Brand: Techcon
Pack Size: 1 Piece

WARNING: Do not soak O-ring in Toluene, MEK and Acetone. Read material safety data sheet for any solvent prior to use.

Spare O-ring. A kit is available made from EPR and is intended for applications using fluids containing UV adhesives, Cyanoacrylates (CAs), Methacrylates, and/or Acrylic Acids. If used, this O-ring may be cleaned as necessary with Isopropyl Alcohol, Acetone and MEK.

Please note: Occasionally and EPR O-ring will swell or degrade when in contact with some UV adhesives, Cyanoacrylates (CAs), Methacrylates and/or Acrylic Acids. This might be due to other components in the fluid product. In these cases we recommend switching to the Viton O-ring which will then perform better with this type of fluid. The O-ring is easy to replace, fitted in the slot within the tank lid.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.