 |
 |
 |
|
Please note - this product has now been made obsolete. Please switch to the 700 series syringe barrels, pistons, adapter assemblies shown below right.
Industrial grade 60cc/ 60ml size syringe barrels. Natural (clear) for use with all adhesives. High density polypropylene safe for use up to 100 psi. Precision flanges for safe attachment to 400 series receiver assembly. Luer lock for twist on attachment of needle tips. Use with 400 series wiper pistons.
The syringes are industry compliant silicone free, low friction polypropylene. Supplied in a sealed pack of 50 syringe barrels.
MPN: 460LL-1
Material: Polypropylene
Colour: Clear (natural)
Capacity: 60cc (60ml)
Barrel Length: 6.10" - 154.94mm
Outer Diameter: 1.17" - 29.72mm
Inner Diameter: 1.05" - 26.67mm
Details: Industrial Grade Safe, Silicone Free
Commodity Code: 39269097
Pack Size: 50
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
Material: Polypropylene - Colour: Clear (natural)
- Capacity: 60cc (60ml)
- Barrel Length: 6.10" - 154.94mm
- Outer Diameter: 1.17" - 29.72mm
- Inner Diameter: 1.05" - 26.67mm
- Details: Industrial Grade Safe, Silicone Free
400 series syringe barrels are designed for use with pneumatic dispensing equipment or manually with a piston and plunger rod. They are thick walled with wide flanges and so designed for high pressures. Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment. If used with an air powered dispenser, air adapter part 900-1150-3 is required. If using as a manual syringe barrel, rubber wiper piston part 460L-2 and plastic plunger rod part 460L-4 are also required. The full assembled syringe with piston and rod is available as part code MS460LL-1.
|
|
|
 |
|
 |
|
|
|
