Premier dispensing syringe barrels
are silicone and chloride- free and designed to work with dispensing equipment
- either manually or on a pneumatic dispenser. The syringe barrels are made from low friction
polypropylene to ensure accuracy, repeatability and productivity. Features a
double helix luer lock for secure dispense tip attachment. These products are supplied in sealed packs.
Natural (Clear) barrels are suitable for most
generic fluid dispensing applications. Maximum operating pressure is 100 psi
(6.9bar). Use with Syringe Guns or air-powered dispensers. White polyethylene wiper pistons are supplied
in the same box. This kit is for 500 barrels and 500 wiper pistons.
- Materials Polypropylene (Barrel) Polyethylene (Piston)
- Barrel Capacity 30cc (30ml)
- Barrel Length 4.66" - 118.36mm
- Barrel Outer Diameter 0.99" - 25.27mm
- Barrel Inner Diameter 0.89" - 22.63mm
- Colour Natural (Barrel) White (Piston)
- Commodity Code: 39269097
- Brand: Adhesive Dispensing Ltd
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
- Materials Polypropylene (barrel) Polyethylene (Piston)
- Capacity 30cc (30ml)
- Length 4.66" - 118.36mm
- Outer Diameter 0.99" - 25.27mm
- Inner Diameter 0.89" - 22.63mm
- Colour Natural (barrel) White (Piston)
- Brand: ADL
Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance.
Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment.
These products are safe for use up to 100 psi pressure. Barrels are not for medical use but are precision manufactured for industrial applications.
Components are certified silicone-free components and will not contaminate any fluids that are dispensed from them.
|
