A pneumatic metal cartridge gun with quick attach threaded retainer and quick shut off to reduce drips. Suits 8oz (230cc) cartridges. Suited to controlled lines or potting of most adhesives, fluids, sealants, RTV, grease, gels, long cure or single part epoxies, mastics and potting compounds.
Connect an air line to the applicator or use optional hoses. Undo the end cap and remove the retainer. Load in a 8oz (237ml) cartridge. Replace the retainer and screw tightly to secure the cartridge. Attach a threaded nozzle or use a male luer lock adapter with any standard needle tips. Press trigger for flow and adjust your regulator or mains air supply for control.
Part ID: 250085
Construction: Stainless Steel/ Aluminium/ Nylon
Colour: Silver/ Black
Attachment: Bayonet retainer to handle
Max Air Pressure: 100 psi
Air connection: B-Nut Thread
Warranty: 1 Year
Commodity Code: 90289090
Approvals: CE
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: 250085
- Construction: Stainless Steel/ Aluminium/ Nylon
- Colour: Silver/ black
- Attachment: Threaded retainer to handle
- Max Air Pressure: 100 psi
- Air connection: B-Nut thread
- Warranty: 1 Year
This gun is compatible with Techcon cartridges part code TS80C and Semco cartridges part code 220319. Optional metal retainer bodies are available to convert this gun to use different cartridge sizes 2.5oz (60cc), 6oz (180cc) and 12oz (360cc).Needle tip adapters can also be used with the cartridges for attachment of all standard needle tips. Our guns are all covered by a 12 month manufacturers warranty.
|
