 |
 |
 |
|
The TS Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminium locking insert, then moulded into polypropylene hubs. Moulded hub colours correspond to gauge size.
All TS Series tips secure to syringe barrels and correspond to the luer lock specification.
Tips are colour coded for gauge size. The tip uses a slightly tapered internal design where the shaft joins the hub to ease fluid flow and reduce restriction. This allows for a lower pressure to be used for dispensing liquids and pastes.
Part ID: TS20-1
Materials: Polypropylene/ Stainless Steel
Hub Colour: Yellow
Inner Diameter: 0.024" - 0.61 mm
Outer Diameter: 0.036" - 0.91 mm
Tube Length: 1.0" - 25.40 mm
Tip Details: Industrial grade, Silicone Free
Commodity Code: 90289090
Brand: TSI
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: TS20-1
- Materials: Polypropylene Hub/ Stainless Steel Tube Colour: Yellow
- Inner Diameter: 0.024" - 0.61 mm
- Outer Diameter: 0.036" - 0.91 mm
- Tube Length: 1.00" - 25.40 mm
- Tip Details: Industrial grade, Silicone Free
1. Why are these tips
good for solvents? Solvents and solvent
based glues can attack tips that are assembled using glues. Some
precision tips have the metal tube glued to the plastic hub
(usually a UV cure clear adhesive is used). Where this adhesive
bond is used, some aggressive solvents can break it down causing
the glue bond to fail. So using these aluminium crimped tips will overcome this.
2.
How do we clean these tips? We
recommend all dispensing tips are replaced each time a new
dispensing application is started. By cleaning with solvents,
there is a chance that dried residue of adhesives or pastes will
contaminate fresh materials. For fluids that do not cure such as
lubricants, cleaning will not be required.
3.
What is the delivery time on these products?
We hold stocks of these parts so for UK & Ireland customers,
goods are received by tracked courier within about 48 hours. For
customers in Europe, delivery is 24 - 72 hours. For customers
outside of Europe, delivery is around 3-4 days. We always send
using a tracked courier.
4.
How do these tips compare to others I've seen?
Our tips are industrial grade safe so can be used at high
pressures. They are silicone-free materials so will not
contaminate fluids dispensed through them. The tips have high
tolerances and can be used on automated dispensing equipment.
The tubes are burr-free stainless steel. We sell in sealed and
labelled packs with batch codes.
5.
What fluids can be used with these tips?.
Solvents, solvent based glues, lubricants, paints, inks, oils,
silicones, sealants, RTVs, solder pastes, fluxes, UV cure
adhesives, epoxies, PUs, PVAs, chemicals and more. Avoid using
these tips with Cyanoacrylate adhesives which will clog against
the metals - use Teflon lined tips. If dispensing a very high
viscosity filled paste, consider using our smooth flow
tapered
tips.
General purpose TS tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.
General purpose TS tips are safe for use up to 100 psi pressure. TS tips are certified silicone-free components and will not contaminate any fluids that are dispensed from them.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Precision burr free tubing
- 1" length
- Silicone free Safe for use up to 100 psi
- Luer lock colour coded hubs
- Crimped shaft to hub
- Packs of 50 or bulk on request
- Compatible with all fluids
|
|
|
|
|
|
|
|
|
