A02 is a low strength anaerobic threadlocker, designed to allow easy disassembly of metal threaded components. Low strength thread locking adhesive for use on small fasteners less than 1/4" (6mm). Recommended for use on components and soft metals requiring adjustment or removal. Use for adjusting screws, countersunk head screws, set screws and low strength metals.

This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot.

---

Part ID: A02
Resin: Dimethacrylate
Bottle Size: 50 ml LDPE bottles
Colour: Purple
Viscosity: 1,200 to 1,500 cps
Temp. Range: -50 to 150 C
Fixture Speed: < 15 minutes @ 20 C
Full Cure Time: 24 hours @ 20 C
Breakaway Strength: 8 Nm
Prevailing Strength: 4 Nm
Brand: Adhesive Dispensing Ltd

---

Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)

---

• Part ID: A02
• Resin: Dimethacrylate
• Bottle Size: 50 ml LDPE bottles
• Colour: Purple
• Viscosity: 1,200 to 1,500 cps
• Temp. Range: -50 to 150 C
• Fixture Speed: < 15 minutes @ 20 C
• Full Cure Time: 24 hours @ 20 C
• Breakaway Strength: 8 Nm
• Prevailing Strength: 4 Nm

Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

Adhesives are shipped by tracked courier.