Our ADV series barrels are the highest quality dispensing syringe barrels for use with pneumatic dispensers as well as manual applicators. These parts are silicone and chloride-free. The barrels are made from low friction polypropylene to ensure accuracy, repeatability and productivity. Barrels feature a double helix luer lock for secure twist-on dispense tip attachment. Amber (tinted) colour (520Nm) for use with UV cure adhesives or light sensitive adhesives..
The radiused outlet end design provides an easier flow path to reduce material back pressure. It adds a benefit for less air entrapment when filling. These products offer superior performance and are premium grade.
A universal polyethylene wiper piston is available that seals the material from air, provides a consistent wipe, protects against drawback and reduces fumes. Use a piston for thick pastes, gels or liquids to improve flow. Maximum operating pressure for all components is 100 psi (6.9bar). ADV830BA is supplied in a sealed pack of (50) barrels.
MPN: ADV830BA
Material: Polypropylene (HDPP)
Capacity: 30cc (30ml)
Length: 4.66" - 118.36mm
Outer Diameter: 0.99" - 25.27mm
Inner Diameter: 0.89" - 22.63mm
Colour: Amber (UV Tinted)
Tip Connection: Luer Lock
Maximum Pressure: 100 PSI
Commodity HS Code: 39269097
Brand: Adhesive Dispensing Ltd
Details: Silicone-Free, Industrial Grade
All parts in sealed packs with labels, batch code, C of C.
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Material Polypropylene
- Capacity 30cc (30ml)
- Length 4.66" - 118.36mm
- Outer Diameter 0.99" - 25.27mm
- Inner Diameter 0.89" - 22.63mm
- Colour Amber
Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance. Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment.
Barrels are shipped with every new dispenser and syringe gun that we supply. Barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. The internal bore has no taper and this ensures the wiper piston moves consistently down the barrel without restriction. The wide flanges at the top are for quick attachment to the air adapter assembly (to a dispenser) or to a manual syringe gun. This design ensures syringe barrels do not come loose or break under air pressures up to 100 psi. The luer lock tip attachment provides secure dispensing under high pressure.
Pistons have blades to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. The blades also act to stop liquids from going past them as they dispense. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel. Pistons can provide a barrier seal for liquids placed inside. But for more protection when dispensing watery liquids and cyanoacrylate adhesives, use our filter trap in the airline adapter assembly to your syringe dispenser.
|
