The SE needle series are stainless steel shafts with a luer lock polypropylene hub. This line of dispensing needles is burr-free, and electro-polished shaft for unobstructed and consistent material flow. In addition they are silicone free. Designed to dispense most viscosity fluids and adhesives. These tips are epoxy bonded from shaft to hub and are supplied at an economical price.
Tips are colour coded for gauge size. The tip features a tapered internal design where the shaft meets the hub to improve fluid flow and reduce any restriction. This allows for a lower pressure to be used for dispensing liquids and pastes.
MPN: SE426050PK
Material: Polypropylene/ Stainless Steel
Colour: Beige Hub
Tube ID: 0.010" - 0.25 mm
Tube OD: 0.020" - 0.51 mm
Tube Length: 0.50" - 12.70 mm
Max. Pressure: 100 PSI
Details: Industrial Grade, Silicone Free
Commodity Code: 39174000
Pack Size: 50
Lead Time: Stock Item
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Material: Polypropylene/ Stainless Steel
- Colour: Beige Hub
- ID: 0.010" - 0.254 mm
- OD: 0.020" - 0.510 mm
- Tube Length: 0.50" - 12.70 mm
- Details: Industrial grade, Silicone Free
General purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.
All tips are safe for use up to 100 psi pressure. These tips are precision manufactured for industrial use. Tips are certified silicone-free components to ensure they do not contaminate any fluids or adhesives that are dispensed from them.
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
|
