 |
 |
 |
|
6000 is unique in being the only totally clear low odour, toughened,
fast setting gel adhesive. It's clarity makes it ideal for the bonding
of clear plastics within the sign/display and shop fitting market, it
will also bond most plastics, composite materials and the normal metals
including Steel and Aluminium. 6000 has an open time of 90 seconds
making it ideal for high volume manufacturing applications, and cures to
give a fixture time of around 5 minutes. Full cure is achieved in
12 hours, extended in cold conditions and similarly accelerated in
warmer environments.
The 6000-KIT includes a 50ml cartridge of clear, high stength, low odour acrylic, a manual 50ml 1:1 ratio applicator gun, 10 x assorted size static mix nozzles, 3 x luer tip adapters and 10 x assorted precision dispense tips.
A dispensing system with two-part toughened acrylic adhesive designed for the bonding most plastic, glass and metal substrates.
- Part ID: 6000-50
- Material: Acrylic adhesive
- Colour: Clear
- Colur: Clear (when mixed) Part A light blue translucent, Part B light pink clear
- Viscosity (mPa.s) 18,000 (when mixed)
- Specific Gravity 0.98 (when mixed)
- Mix Ratio: By Volume 1:1
- Pack Size: 50ml Dual Cartridge
- Applications: Use with plastics, glass and metal
- Open Time (at 23�C): 30 seconds
- Gel Time: 55 seconds
- Handling Time (on BMS): 3 minutes
- Full Strength: 8 hours
- Shelf Life: 12 months (Storage at 5 C) Do not freeze this product, keep away from direct sunlight.
- Gun: 1:1 ratio manual hand applicator
The surfaces should be clean, dry and grease free prior to bonding. After application of the mixed adhesive, assemble the parts and squeeze together with sufficient pressure to ensure the adhesive spreads to cover the entire bond area. Apply light clamping pressure and do not disturb, or realign the joint, whilst the adhesive is curing.
Temperatures lower than ambient (23 C) will result in a slower cure of the adhesive whereas higher temperatures accelerate the cure and reduce the open time. As this product cures very rapidly, mixed adhesive in larger quantities may become very hot.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Total clarity on transparent materials
- Invisible bonds on solid materials
- Minimal odour
- Low exotherm will not cause witness marks on thin gauge materials
- Clear plastic signs, POS displays, lecterns, awards and boxes
- Metal fabrications requiring shock resistance/flexibility
- Bonding dissimilar materials with different coefficients of expansion
- Loudspeaker components with good resistance to vibration
|
|
|
|
|
|
|
|
|
