The AD needle series
consist of a stainless-steel shaft with a luer lock polypropylene hub. This
line of dispensing needles is burr-free and electro-polished shaft for
unobstructed and consistent material flow. In addition they are silicone and
chloride free. These tips are designed to dispense most viscosity fluids and
adhesives. These tips are UV bonded from the metal shaft to the plastic hub and
are premium grade tips.
All tips are colour
coded for gauge size. The tip features a slightly tapered internal design where
the stainless steel tube is bonded inside the hub which improves fluid flow and
reduces flow restriction. This allows for a lower pressure to be used for
dispensing liquids and pastes. These tips are certified silicone-free so adhesives
will not be contaminated by silicone oils during dispensing. They are
industrial grade safe to 100 psi pressure. Our tips ship direct from stock and are supplied in sealed and labelled packs with batch codes.
- Material:
Polypropylene/ Stainless Steel
- Colour:
Grey Hub
- ID:
0.047" - 1.19mm
- OD:
0.058" - 1.45mm
- Tube
Length: 2.0" - 50.8mm
- Maximum Pressure: 100 PSI
- Commodity Code: 39174000
- Brand: Adhesive Dispensing Ltd
Adhesive Dispensing Ltd
provide a wide range of equipment options for dispensing almost all assembly
fluids - from watery liquids, solvents, primers and activators through to thick
pastes, sealants, silicones, gels and epoxies.
- Material: Polypropylene/ Stainless Steel
- Colour: Grey Hub
- ID: 0.047" - 1.19mm
- OD: 0.058" - 1.45mm
- Tube Length: 2" - 50.8 mm
- Details: Industrial grade, Silicone Free
- Brand: Adhesive Dispensing Ltd
General purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.
All tips are safe for use up to 100 psi pressure. These tips are precision manufactured for industrial use. Tips are certified silicone-free components to ensure they do not contaminate any fluids or adhesives that are dispensed from them. Tips are shipped by tracked courier.
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
|
